Thingiverse
Quick Clamp & Release Vice by AndyGadget
by Thingiverse
Last crawled date: 4 years ago
I do quite a lot of work with circuit boards and small mechanical parts and was finding the 'helping hands' crocodile clip type tool too fiddly and a bench vice too big for my needs, so after a bit of thought I designed my own light duty 3D printed vice with a novel tension / release method.
This vice is ideal for holding small parts or circuit boards up to 70mm (2 3/4") while you adjust / solder / glue etc.
To clamp insert the workpiece into the jaws, pull the elastic cord through the slot to a suitable tension then pull the cord down to lock.
To release simply pull the cord up. The tension on the elastic is eased and the workpiece freed.
After a bit of practice it's a matter of a couple of seconds to clamp a workpiece in place.
I've put a more complete write-up of this on Instructables : https://www.instructables.com/id/Quick-Clamp-Release-Vice-Vise/
This vice is ideal for holding small parts or circuit boards up to 70mm (2 3/4") while you adjust / solder / glue etc.
To clamp insert the workpiece into the jaws, pull the elastic cord through the slot to a suitable tension then pull the cord down to lock.
To release simply pull the cord up. The tension on the elastic is eased and the workpiece freed.
After a bit of practice it's a matter of a couple of seconds to clamp a workpiece in place.
I've put a more complete write-up of this on Instructables : https://www.instructables.com/id/Quick-Clamp-Release-Vice-Vise/