Thingiverse
Quest 2 Controller Rechargeable Magnetic Battery Mod by gabinet2708
by Thingiverse
Last crawled date: 3 years, 11 months ago
I was inspired by BestwinVR Magnetic Charge controller (https://www.amazon.com/dp/B08P9T1NM9), but i already have some magnetic usb cables and a silicon grip for my controllers, i put a DIY Remix so you can complete your magnetic charger kit
Material links
i used this cable, but you can use any magnetic cable, that has a circular tip with a diameter of max 9.5mm
-> topk am60 (https://articulo.mercadolibre.com.mx/MLM-920732900)
You can use any AA Battery that has the usb port (micro usb or type c) on the side (dont use the ones that have the port on the top)
-> AA Battery (https://www.amazon.com/dp/B08D98NXS3 or https://www.amazon.com/dp/B08C7SQTMW or https://articulo.mercadolibre.com.mx/MLM-789377186)
you will need 1 extra magnetic tip
->Extra Magnetic Tip (if your battery is micro usb or Type c)
Material links
i used this cable, but you can use any magnetic cable, that has a circular tip with a diameter of max 9.5mm
-> topk am60 (https://articulo.mercadolibre.com.mx/MLM-920732900)
You can use any AA Battery that has the usb port (micro usb or type c) on the side (dont use the ones that have the port on the top)
-> AA Battery (https://www.amazon.com/dp/B08D98NXS3 or https://www.amazon.com/dp/B08C7SQTMW or https://articulo.mercadolibre.com.mx/MLM-789377186)
you will need 1 extra magnetic tip
->Extra Magnetic Tip (if your battery is micro usb or Type c)