Thingiverse
QCX PTT and CAT Phono plug Cover by markjhatch
by Thingiverse
Last crawled date: 3 years, 4 months ago
Plugging the paddle into the PTT of a QCX-mini could really ruin your day. This is a simple cover that for both the PTT and CAT jacks to avoid this accident.
I have included the Fusion 360 files so that you can modify this if the distance between your plugs differ slightly or your printer is tuned to under/over flow compared to mine.
If you use cura, you might want to use the "elephant" foot option to reduce the horizontal spread. You might have to trim the tops of the pins at a slight angle to allow them to go in easier. Tighter is better...
I printed top up with no supports.
ALTERNATIVE:
This plug did not fit for Jim Sheldon (W0EB) -- they were too narrow and printing them top up caused the feet to require trimming. So he designed a very nice alternative with longer pins, rounded corners and slightly greater distance between the pins. He recommends printing top DOWN and high resolution for best fit. So if the original plug that I designed does not fit, you might try his, it is very nice!
I have included the Fusion 360 files so that you can modify this if the distance between your plugs differ slightly or your printer is tuned to under/over flow compared to mine.
If you use cura, you might want to use the "elephant" foot option to reduce the horizontal spread. You might have to trim the tops of the pins at a slight angle to allow them to go in easier. Tighter is better...
I printed top up with no supports.
ALTERNATIVE:
This plug did not fit for Jim Sheldon (W0EB) -- they were too narrow and printing them top up caused the feet to require trimming. So he designed a very nice alternative with longer pins, rounded corners and slightly greater distance between the pins. He recommends printing top DOWN and high resolution for best fit. So if the original plug that I designed does not fit, you might try his, it is very nice!
Similar models
thingiverse
free
Nintendo Switch Thumbstick Cover by zJames
...rint them face up with support so that the top has the best surface. you may need to trim the inner area slightly to make it fit.
thingiverse
free
Ai3M Plug Cover - Alternate Inset Logo
...dit: thanks to rojsimpson, now includes v2 with fixed screw holes to use the included m3 screws! (file: plug cover alternate v2)
grabcad
free
Covers for NEMA 17 stepper - GX12 plug
... and 3d print them. at the moment i have no way to 3d print them but i am very curious if someone print them how they looks like.
thingiverse
free
Motor/belt cover for Boosted Stealth V1 trucks by keycaps
...s to make sure this will fit before you print it.
i made the bottom flat so it's easy to print. light supports are required.
thingiverse
free
Caliburn Rival Takedown Pin Retention Clip
...this cover that keeps them in.
slides onto the top picatinny rail.
go light on the perimeters and infill, needs to flex slightly.
thingiverse
free
Improved Hip & Waist joints for Mad Cat MKII by TimeFramed
...er to fit the insert into because you cannot hold the rotators in position from the backside; but i got it in; very nice results.
thingiverse
free
Toolbox dividers by cmavila
... sometimes very tight, so i end up using "horizontal expansion=0.1" in cura, which end up quite good.
hope you like it.
thingiverse
free
Werner Extension Ladder 1A Rung Plug by ClintonRH
... speeds so i installed with a bit of acrylic caulk to hold them in place. your tolerances might be different and require scaling.
thingiverse
free
Joey Electric Folding Bike Screen Cover by blakehaas
...and taking it places.
it is almost an exact fit so you might want to print it 1% larger just in case of variance in your printer.
thingiverse
free
CANON9 connector cover by martin357
... with a file so they fit together. use a m3 thread tool to cut threads into the prepared holes so you can screw in the connector.
Markjhatch
thingiverse
free
Bezel/Frame for 1.3" OLED for Benchduino by markjhatch
...frame for a 1.3" oled for my benchduino development board. the design mimic an existing frame that i printed for a 16x2 lcd.
thingiverse
free
Desk stand for QCX by markjhatch
...screws.
if you need a some more space on the nuts, you can print the design from here:
https://www.thingiverse.com/thing:4190589
thingiverse
free
Tek 2465b Front Cover by markjhatch
...th more expertise than me will create a re-mix address this?
in any case, it meets my needs and perhaps will work for others too.
thingiverse
free
Case for KX 2nd Look by markjhatch
...o be started after the kx2 starts. otherwise it cannot send the command to the kx2 to output the decoded text over the acc cable.
thingiverse
free
Orbiter + HeroMe Gen 5 +V6 for Tronxy X5SA-400 by markjhatch
...tructions.
my measurements for the bltouch offsets were -40, -7, but this was through direct measurement so could be off +/- 1mm.
thingiverse
free
Hero Me Gen 5 CR-10S Pro Gantry/V6 Hot end by markjhatch
...hat provided the clearance needed to lower the z further:
https://www.thingiverse.com/thing:4088843. works great on my cr10s-pro!
Qcx
thingiverse
free
QCX case by OK1IEC
...ingiverse
case for cw tranceiver qcx, produced as kit by http://qrp-labs.com/qcx.html. optional bottom battery holder (4x18650).
thingiverse
free
DL2MAN QCX-SDR Enclosure by k1fm
...dl2man qcx-sdr enclosure by k1fm
thingiverse
a 3d printed enclosure for the dl2man qcx-sdr implementation.
thingiverse
free
QRP Labs QCX radio by N8KLX
...qrp labs qcx radio by n8klx
thingiverse
this the case i made for the qrp labs qcx transceiver.
thingiverse
free
QCX Classic Enclosure by KN6EZE
...e design.
you will need:
4x m3 screws (need to double check size)
4x m3 nuts to hold screws in place (need to double check size)
thingiverse
free
Stable table stand for QCX by schizzo
...n modify it to fit the accuracy of your printer.
requires two 30mm m3 screws.
i used a layer height of 0.2mm
and a filling of 45%
thingiverse
free
QCX-mini quick stand by jobewan
...qcx-mini quick stand by jobewan
thingiverse
just a great little addition to your ham shack.
thingiverse
free
Tilting feet for QRP-Labs QCX-Mini case by lex_ph2lb
...le sided tape or contact glue would be the way to install them.
folded away the height is the same as the original supplied feet.
thingiverse
free
Stand for QRP Labs QCX transceiver by pshuman
...s we worked on it.
no specifics on print settings, but you will need to print with support.
i'm not associated with qrp labs.
thingiverse
free
QCX Kit Radio Case by scottbaker
... compensate for the different component heights.
note2: i printed this in pla, but you might also consider petg or abs filament.
thingiverse
free
Desk stand for QCX by markjhatch
...screws.
if you need a some more space on the nuts, you can print the design from here:
https://www.thingiverse.com/thing:4190589
Phono
turbosquid
$45
1948-Bendix-613-Phono
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$20
Audio Research PH9 Phono Stage Preamplifier black
...odel contain 571903 quads, 64251 tris, and no ngons<br>this model contains 636154 polygons<br>number of textures - 10
3d_export
$20
Audio Research PH9 Phono Stage Preamplifier Silver
...odel contain 571903 quads, 64251 tris, and no ngons<br>this model contains 636154 polygons<br>number of textures - 10
3d_export
$30
yamaha cx-a5100 mx-a5000
...outputs, with two dedicated xlr subwoofer outputs and a phono stage for the latest cutting edge vinyl spinning. it...
thingiverse
free
Vinyl Record Phono Cartridge Box by eric_chu
...vinyl record phono cartridge box by eric_chu
thingiverse
this box can up to 3 phono cartridge storage.
thingiverse
free
Enclosure to mount Phono Jacks on Wire by toguan
... made these little enclusures to do just that. they are roughly 30 x 30 x 30 mm in designed dimensions.
hope they are useful.
thingiverse
free
Philips 212/312 Turntable phono Cartridge Alignment Tool by YLeeCoyte
...last picture shows the proper position of the phono stylus i have tried it and it gets my cartridge aligned for proper tracking.
thingiverse
free
Phono SME Headshell Box with IKEA GODMORGON by fdreger
...article number 504.002.70) as cover, the base can carry up to 4 or 10 sme headshells fitted with your favourite phono cartridges.
thingiverse
free
45 RPM record (phono) adapter by jurriaanpruis
...hing:10475
remodelled it from scratch using freecad so it wasn't too small.
use a lot of perimeters while printing (i used 6)
thingiverse
free
RCA socket adapter for phono SME 3009/3012 SERIES 2 by pathia
...ies 2 by pathia
thingiverse
rca socket adapter for sme 3009 & 3012 (series 2)
it comes without a hole for the locking screw.
Ptt
turbosquid
$37
PTT Design Ascot Elbow Chair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
PTT mailbox (Dutch)
...ptt mailbox (dutch)
thingiverse
the original dutch ptt mailbox
thingiverse
free
PTT bowman button by markus22rus
...ptt bowman button by markus22rus
thingiverse
ptt bowman button
thingiverse
free
PTT Switch Case by tdeagan
...ptt switch case by tdeagan
thingiverse
this is a hand-mounted case for a ham radio ptt swtich.
thingiverse
free
PTT (KPN) Afdekplaat by jwveldhuis
...pn) afdekplaat by jwveldhuis
thingiverse
cover plate for a telephony wall box used in the netherlands by ptt telecom in the 80s.
thingiverse
free
Abbree PTT tangent Holder by Grind3x
...abbree ptt tangent holder by grind3x
thingiverse
abbree ar-780 ptt tangent holder
thingiverse
free
Baofeng UV-5R and PTT Holder by M4NUXWORKSHOP
...ng uv-5r and ptt holder by m4nuxworkshop
thingiverse
baofeng uv-5r and ptt desktop holder.
*not compatible with extended battery
thingiverse
free
Firefighting PTT cable tidy and helmet clip by Mo22is
... tidy attached to the webbing strip of firefighting tunic/coat. the firefighting helmet comms is connected to the ptt hand piece.
thingiverse
free
Sena SR10 - PTT Preventer by omninate
...rts
slide the sena sr10 into the 3d-printed enclosure
secure the enclosure to the rear of the sr10 with four m3x8 machine screws.
thingiverse
free
Vertex / Yaesu FTH 2009 PTT by axel_becchi
...is a reeplace for the ptt butom for yaesu / vertex handie, it requieres a little bit of sand after print, print at 40 mm/s speed.
Cat
3d_export
$26
Cat
...cat
3dexport
cat
3d_export
$6
Cat
...cat
3dexport
cat
3d_export
$6
cat
...cat
3dexport
this is a cat
3d_export
$5
Cat
...cat
3dexport
cat
3d_export
$5
Cat
...cat
3dexport
cat
3d_export
$5
cat
...cat
3dexport
low poly cat ball
archibase_planet
free
Cat
...cat
archibase planet
cats animals
cat n140208 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
cat
...cat
3dexport
a cat that may look like a leopard because of its color.
turbosquid
free
Tidy Cats Cat Litter
...alty free 3d model tidy cats cat litter for download as blend on turbosquid: 3d models for games, architecture, videos. (1206013)
turbosquid
$15
The Battle Cats Cat Base
...odel the battle cats - eraser cat for download as max and ige on turbosquid: 3d models for games, architecture, videos. (1591322)
Plug
3d_export
$5
plug
...plug
3dexport
3d_export
$5
plug cover
...plug cover
3dexport
plug cover
3d_export
$5
spark plug
...spark plug
3dexport
spark plug
3d_export
free
spark plug
...spark plug
3dexport
spark plug
turbosquid
$30
plug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
plug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Plug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Plug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Plug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
plug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Cover
archibase_planet
free
Cover
...cover
archibase planet
cover place setting
cover n170807 - 3d model for interior 3d visualization.
3ddd
$1
cover
...cover
3ddd
ковер , круглый
cover decor
archibase_planet
free
Cover
...cover
archibase planet
cover place setting setting
servis-cafe1930 - 3d model for interior 3d visualization.
turbosquid
free
Coverings
...rings
turbosquid
free 3d model coverings for download as dwg on turbosquid: 3d models for games, architecture, videos. (1279391)
3d_export
$5
plug cover
...plug cover
3dexport
plug cover
turbosquid
$25
Covers
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
manhole cover
...manhole cover
3dexport
manhole cover gost, stl, step
turbosquid
$5
Street Gas Cover Manhole Cover
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Bed cover
...bed cover
3ddd
постельное белье
very useful bed cover
3d_export
$5
cpu cover
...cpu cover
3dexport
cpu cover, cpu box, sheet metal container