Thingiverse
QAV 250 - MTx Rabbit 250 by MTx3D
by Thingiverse
Last crawled date: 3 years, 1 month ago
MTx presents RABBIT 250
The RABBIT 250 is a FPV race drone frame with thoughtful design to create space for electronics and cables. All important components such as FC, PDB, Video TX, Receiver and Camera are protected by plastic. Stable base plate construction and 4 individually replaceable arms provide good stability.
There is enough room in the body for PDB and FC to be superimposed. On the left side there is a notch to block a MATEK PDB. On the right side there is a gap for fast USB and SD-CARD access (adapted for OMNIBUS F4 V5). At the back there are 2 holes for the SMA plug, intended for antennas.
The diagole between the motors is 250mm. The frame has been designed for 5 "propellers, the holes for the motors are 16x19 mm, designed for M3 x10 mm screws.
With 30A 4s ESC and 4s 2250mAh LiPo this drone is very fast and offers further possibilities to optimize.
My variant owns a Foxeer Monster cam and a Eachine VTX with 5.8GHz.
As a video receiver, I use a Eachine EV100, before a Quanum Cyclops.
A list of recommended parts can be found below.
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
ESC (4x):https://goo.gl/kxCiiThttps://goo.gl/uYnxYhhttps://goo.gl/Q6DWuGhttps://goo.gl/2MXq4rhttps://goo.gl/VNrw2x
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
MOTORS (4x):https://goo.gl/nNWkF7
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
COMBO (4x ESC, 4x BL Motor, 4x Props 5" CW+CCW)https://goo.gl/RK5QUS
COMBO (4x ESC, 4x BL MOTOR)https://goo.gl/tjzwPZ
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Flightcontroller:https://goo.gl/ZjB7wn
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
PDB:https://goo.gl/bZcKTo
The RABBIT 250 is a FPV race drone frame with thoughtful design to create space for electronics and cables. All important components such as FC, PDB, Video TX, Receiver and Camera are protected by plastic. Stable base plate construction and 4 individually replaceable arms provide good stability.
There is enough room in the body for PDB and FC to be superimposed. On the left side there is a notch to block a MATEK PDB. On the right side there is a gap for fast USB and SD-CARD access (adapted for OMNIBUS F4 V5). At the back there are 2 holes for the SMA plug, intended for antennas.
The diagole between the motors is 250mm. The frame has been designed for 5 "propellers, the holes for the motors are 16x19 mm, designed for M3 x10 mm screws.
With 30A 4s ESC and 4s 2250mAh LiPo this drone is very fast and offers further possibilities to optimize.
My variant owns a Foxeer Monster cam and a Eachine VTX with 5.8GHz.
As a video receiver, I use a Eachine EV100, before a Quanum Cyclops.
A list of recommended parts can be found below.
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
ESC (4x):https://goo.gl/kxCiiThttps://goo.gl/uYnxYhhttps://goo.gl/Q6DWuGhttps://goo.gl/2MXq4rhttps://goo.gl/VNrw2x
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
MOTORS (4x):https://goo.gl/nNWkF7
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
COMBO (4x ESC, 4x BL Motor, 4x Props 5" CW+CCW)https://goo.gl/RK5QUS
COMBO (4x ESC, 4x BL MOTOR)https://goo.gl/tjzwPZ
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Flightcontroller:https://goo.gl/ZjB7wn
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
PDB:https://goo.gl/bZcKTo
Similar models
thingiverse
free
ARFUN 95 PRO frame micro brushless 1104 motors 20x20 flight controller by cncmodel
...gl/7k4vr1
2s lipo https://goo.gl/gwmnxj
arfun95 pro https://goo.gl/a3njzf
you can see the video here https://youtu.be/k_2yvvcmbt4
thingiverse
free
85-95-100 mm micro quadcopter framr for 1103 motors, 16x16 mm FC & 4in1 ESC and 30 mm battery width by SkyPlayer
...
thingiverse
micro quadcopter frame for 1103 motors, 16x16 mm fc&esc, eachine tx01-02-03 camera&vtx, 30 mm battery width
3dwarehouse
free
FPV racing quadcopter / multirotor
...6 motors 20a esc naze32 flight controller volo mini pdb bonka 1300mah 4s 65c battery hs1177 camera #multirotor #quadcopter #racer
thingiverse
free
Camera Mount for Eachine Falcon 250 Frame by fergo
...48-degree-lens-fpv-camera-p-977401.html
modified from a great design by alta1re to suit the falcon frame.
printed in abs plastic.
thingiverse
free
Micro 110mm FPV Quadcopter 3" propellers.Quad for Kakute AIO FC (20x20mm) and 1104 Motors by cncmodel
...iny frsky 8ch ppm/sbus receiver https://goo.gl/bu2tb4
taranis radio https://goo.gl/1c0l5t
more version are coming for 1103 motors
thingiverse
free
x185s by windrides
...fc/pdb mount (v7)
1806 motors
20a esc
battery: 1000-1400mah 3-4s
weight: 51 grams (pla, 100% infill), 33.2grams (pla, 30% infill)
thingiverse
free
210 X-Drone Full Frame by juanjomarti
...-liantian led rgb
-emax rs2205
-esc hobbywing 30a blheli-s
-5" blades
https://www.youtube.com/watch?v=w3nzylzjkgk&t=282s
thingiverse
free
Precious X Frame Racer 220 by joaoprecivalli
...tery 3s-4s 1300mah
flight controler cc3d/naze/kiss/spracing
pdb matek 12v-5v
props 5"
fpv 200mw vtx mini
gopro/mobius/runcam
thingiverse
free
MTx Drones - Matrix 250 - Race Drone by MTx3D
...connector in rear
-16x19 motormounts
-30,5mm x 30,5 mm mount for fc
-20mm landing-gear
-faceplate ready for quanum micro cmos cam
thingiverse
free
QX95 FRAME Reinforced by Welbior
...tps://goo.gl/sd6vk4
eachine tiny led strip board qx95l : https://goo.gl/nmx15w
eachine lipo 1s 25c 750mah : https://goo.gl/khmhaz
Mtx3D
thingiverse
free
Sensei 300 Race Quadrocpter by MTx3D
...hless
20a 4s esc
rhino 2250mah 4s lipo
5045 or 6040 prop
quanum 600tvl micro cam 12,5mm x 12,5mm
600mw videotx
dsmx orx 2.4ghz rx
thingiverse
free
SHURIKEN 230 - QAV FPV Drone by MTx3D
...m3 screws
printing:
1x lowerplatte
1x lowerplatte lipofix
4x arm (choose which mount you need)
1x upperplatte
optional: 4x spacer
thingiverse
free
MTx Drones - Matrix 250 - Race Drone by MTx3D
...connector in rear
-16x19 motormounts
-30,5mm x 30,5 mm mount for fc
-20mm landing-gear
-faceplate ready for quanum micro cmos cam
Mtx
turbosquid
free
mtx model box
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
Speakers 3D Model
...power material jbl pioneer denon philips klipsch polk sony mtx speakers 3d model andriusp 57965...
3d_export
$159
Yamaha Apex Snowmobile 3D Model
...apex snowmobile 3d model 3dexport yamaha apex gt gtx mtx apx snowmobile snowbike snow scooter 2010 2011 2012 fun...
thingiverse
free
Cygolite HotShot MTX Rack Mount by jmisavage
...tx rack mount by jmisavage
thingiverse
i design this bracket so a cygolite hotshot 2w can be attached to a topeak mtx bike rack.
thingiverse
free
Adapter XLC Rücklicht an Topeak MTX Gepäckträger by b22
...epäckträger by b22
thingiverse
hiermit kann man ein xlc rücklicht (evtl auch andere) an einen topeak mtx gepäckträger anbringen.
thingiverse
free
MTX bike rack rail for making diy trunk bag/box by Addidis
...l with holes is tested, the original was like half a mm to large and really stuck on there mid way. made it smaller to save time.
thingiverse
free
Topeak MTX Mounting Rail Adaptor by garylovesbeer
...son. i used pla.
cheap advice!
if you print this, and it works, print spares.
final note
anyway i hope someone finds this useful.
thingiverse
free
MTX Rack Mount (Topeak) by JacobChrist
...picture shown is of version 4 which doesn't clip.
do not print posted version 4 if you are the one person that downloaded it!
thingiverse
free
TopPeak MTX Ride1Up 700 Rack Mount by ChrisMaketh
...down. i would probably use lock nuts to ensure they don't come off.
i used #8-32-1.5 inch and they were pretty much perfect.
thingiverse
free
MTx Drones - Matrix 250 - Race Drone by MTx3D
...connector in rear
-16x19 motormounts
-30,5mm x 30,5 mm mount for fc
-20mm landing-gear
-faceplate ready for quanum micro cmos cam
Qav
thingiverse
free
QAV-R/QAV-210/QAV-180/Generic Quad Landing Pad by tes4p00ner
...qav-r/qav-210/qav-180/generic quad landing pad by tes4p00ner
thingiverse
this is a replacement qav-r landing pad.
thingiverse
free
QAV-R Antenna Tube Holder and Antenna Caps For QAV-R, QAV 210, and QAV 180 by jason51873
...caps for qav-r, qav 210, and qav 180 by jason51873
thingiverse
print this with flexible material and slide over rear stand offs.
thingiverse
free
QAV-250 by Hermes1229
...qav-250 by hermes1229
thingiverse
qav-250
thingiverse
free
Foxeer_switcher Mount for QAV-X and QAV-210 by NyeinChanZaw
... is the mount for foxeer switcher vtx. it can be used in qav 210, qav x or others which have 31mm distance between two stand off.
thingiverse
free
qav 210 by Ravvinoff
...qav 210 by ravvinoff
thingiverse
racing drone qav 210
thingiverse
free
Support Runcam Skyplus for QAV-R OR QAV 210 by Strangers
...trangers
thingiverse
support for mounting runcam skyplus on qav-r or qav 210 180.
added version with bumper for 2.1 and 2.5 lens
thingiverse
free
Lumenier Action Camera Mount Vibration Dampening Pins and Circlips (QAV-180 QAV-210 QAV-R ) by tes4p00ner
...pro 250 pin and circlips by alessandroame, in order to fit the lumenier qav-r / qav-180 / qav-210 gopro / mobius / runcam mount.
thingiverse
free
Lumenier QAV-S QAV S Hero 8 Hero8 mount by sun573
...lumenier qav-s qav s hero 8 hero8 mount by sun573
thingiverse
hero 8 mount remixed for the qav s
thingiverse
free
nox5" and qav-x and qav-r session mounts by MichaelJFPV
...nox5" and qav-x and qav-r session mounts by michaeljfpv
thingiverse
make in tpu super slow
thingiverse
free
QAV-R / QAV 210 Go Pro Mount by Mr_Anderson88
...qav-r / qav 210 go pro mount by mr_anderson88
thingiverse
printed out of tpu to absorb vibrations.
Rabbit
3d_ocean
$8
RABBIT
...rabbit
3docean
3d model animal model rabbit 3d rabbit cartoon rabbit model
rabbit is rabbit model polygon
archibase_planet
free
Rabbit
...rabbit
archibase planet
rabbit animals
rabbit - 3d model for interior 3d visualization.
archibase_planet
free
Rabbit
...rabbit
archibase planet
rabbit toy
rabbit - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
rabbit
...rabbit
3dexport
a funny keychain in the form of two rabbit
archibase_planet
free
Rabbit
...rabbit
archibase planet
statuette picturesque element
rabbit - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$24
Rabbit
...
turbosquid
royalty free 3d model rabbit for download as obj on turbosquid: 3d models for games, architecture, videos. (1625018)
turbosquid
$3
Rabbit
...
turbosquid
royalty free 3d model rabbit for download as stl on turbosquid: 3d models for games, architecture, videos. (1531226)
turbosquid
$2
Rabbit
...urbosquid
royalty free 3d model rabbit for download as blend on turbosquid: 3d models for games, architecture, videos. (1629319)
turbosquid
$1
Rabbit
...
turbosquid
royalty free 3d model rabbit for download as c4d on turbosquid: 3d models for games, architecture, videos. (1251078)
turbosquid
$9
Rabbit
...uid
royalty free 3d model rabbit for download as obj and c4d on turbosquid: 3d models for games, architecture, videos. (1393156)
250
design_connected
$27
Arch 250
...arch 250
designconnected
mdf italia arch 250 computer generated 3d model. designed by massaud, jean-marie.
3d_export
$5
ferrari 250 california
...ferrari 250 california
3dexport
1957 ferrari 250 california
turbosquid
free
FAB 250
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Ferrari 250 Testa Rossa 250 1957
... the front suspension is made and there is an engine under the hood. sculpting and textures were used in the study of the chairs.
design_connected
$29
Amouage Sofa 250
...amouage sofa 250
designconnected
busnelli amouage sofa 250 computer generated 3d model. designed by lagravinese, castello.
design_connected
$27
John-John 250
...john-john 250
designconnected
john-john 250 computer generated 3d model. designed by massaud, jean-marie.
design_connected
$22
Airport Sofa 250
...airport sofa 250
designconnected
poliform airport sofa 250 computer generated 3d model. designed by navone, paola.
3d_export
$20
ferrari 250 gto 1962
...ferrari 250 gto 1962
3dexport
ferrari 250 gto 1962
3d_export
$20
ferrari 250 gt california
...ferrari 250 gt california
3dexport
ferrari 250 gt california
turbosquid
$1
Female 250, scan
...can
turbosquid
royalty free 3d model 250 for download as obj on turbosquid: 3d models for games, architecture, videos. (1242260)