PyPortal Case by beckf

...ws of 8 mm to attach the pyportal to the case. onshape project is here more info on pyportal can be found at the adafruit website

...e this is a simple adafruit circuipython pyportal titaneo case, no screws (but you can use if you want) , just clip in place box

... out the picture to show that off. blog post to go with this thing https://3darduinogeek.com/2021/01/01/my-pyportal-case-design/

...b c plug is also a bit wider to accommodate plugs with a wider body. i used #4 x 3/8 inch sheet metal screws to mount the titano.

... under a shelf. the cutout for the usb connector might be to small depending on the cable but this can be cut out after printing.

...al titano. it requires (4) m2.5, 14mm long screws and (4) m2.5 hex nuts to hold the housing and the pyportal assembly together.

...pyportal legs by hfarrer thingiverse just a modification from the original to use less filament. a m3-.50 nut is required.

...finitely be printed and built with no problem. hope you like it and credits to arthur guy (https://www.thingiverse.com/arthurguy)

...roduct/3568 mini oval speakerhttps://www.adafruit.com/product/3923 black nylon hardware kithttps://www.adafruit.com/product/3299

...t accessible the leds are visible and the reset button can be reached through the hexagon pattern. i hope you find this useful.

...ws of 8 mm to attach the pyportal to the case. onshape project is here more info on pyportal can be found at the adafruit website

... out the picture to show that off. blog post to go with this thing https://3darduinogeek.com/2021/01/01/my-pyportal-case-design/

...b c plug is also a bit wider to accommodate plugs with a wider body. i used #4 x 3/8 inch sheet metal screws to mount the titano.

...pyportal legs by hfarrer thingiverse just a modification from the original to use less filament. a m3-.50 nut is required.

...e this is a simple adafruit circuipython pyportal titaneo case, no screws (but you can use if you want) , just clip in place box

... under a shelf. the cutout for the usb connector might be to small depending on the cable but this can be cut out after printing.

...t accessible the leds are visible and the reset button can be reached through the hexagon pattern. i hope you find this useful.

... the bracket to fit a different monitor, i suggest printing just a thin version and checking it before printing the full bracket.

...this is the housing, cover and stand for adafruit pyportal titano. it requires (4) m2.5, 14mm long screws and...

...case thingiverse case

...case thingiverse case

...case thingiverse case for https://www.thingiverse.com/thing:4008790 case printed in surface mode

...case thingiverse detector case first try

...case thingiverse this is case for electrical components. i used it for my led transformer.

...case thingiverse this is a self created model of a case. it is desigend to be printed in a size of 15%.

...case by milesman20051 thingiverse case

...case by zyzomys thingiverse case

...case by ryutaka18 thingiverse case

...case by johnboyjr thingiverse case