Pulse 15e Trailing edge wing connecting brackets by Sigs

Last crawled date: 4 years, 8 months ago

I designed this set of brackets to use for a mod that other users on rcgroups.com came up with to reinforce the fuselage of the Pulse 15e. The holes and hex nut cavities are designed for 8-32 type bolts and nuts. I fastened the top piece to the wood in the fuselage with hot glue after I had the holes drilled and the bolts tightened. To drill the holes so they line up use the top plate that gets mounted to the wood to trace where the holes through the top go, then drill all the way through the fuselage trying to keep the bit as perpendicular to the wood as you can. Then place the plate on the bottom of the wing about at the trailing edge or just in front of the trailing edge. Then drill those holes, if the holes don't match up perfectly don't worry it gets hidden under plates just drill them out more. Hope you find these parts useful. Thanks, here is another mod for the Pulse https://www.thingiverse.com/thing:2892070