Pully for roller skate bearings (supportless) by rrrlasse 3d model
3dmdb logo
Thingiverse
Pully for roller skate bearings (supportless) by rrrlasse

Pully for roller skate bearings (supportless) by rrrlasse

by Thingiverse
Last crawled date: 4 years, 1 month ago
You will need two 608 bearings (22 mm outer diameter, 8 mm inner diameter and 7 mm wide) and an M8 bolt that you can screw into the hole (hole diameter is 7.7 mm so that the screw will thread it).
No need for support if printed as oriented in the STL files.
Fusion360 source included.

Tags