Pulley Mount System by lordofthebricks

Last crawled date: 4 years, 4 months ago

This is a pulley mount system, made for our channel linear slide system. This design mounts on the edge of the channels, allowing the pulley to be housed above the channels. The pulley wheel is encapsulated inside the mount, and the ends are covered with end caps. The pulley rope threads through the holes. The mounts are double-sided, allowing for both the extension and retraction of the sliders.
The small pulley bracket is an alternative that allows the back pulleys to mount inside the channel to reduce the length of the slide assembly to fit inside the 18in sizing cube.
The new endcap is an alternative that lessens the amount of material inline with the rope.