Thingiverse
PT-17 Windscreen Frame ( for 3DLabPrint plane ) by rich_short
by Thingiverse
Last crawled date: 4 years, 1 month ago
This is an alternative window for the 3D Lab Print PT-17. https://3dlabprint.com/shop/stearman-pt-17-kaydet/
It needs to be printed at 0.08mm layer height.
Once printed fold once away from groves, then back.
The side that was on the print bed should end up on the outside.
For the windows use some sturdy transparent packaging plastic.
( v2 is simply a correction to the orientation of the part )
It needs to be printed at 0.08mm layer height.
Once printed fold once away from groves, then back.
The side that was on the print bed should end up on the outside.
For the windows use some sturdy transparent packaging plastic.
( v2 is simply a correction to the orientation of the part )