Thingiverse
PSU mount for Microcube by ort
by Thingiverse
Last crawled date: 4 years ago
This mount allow to fix the PSU of your microcube inside the printer structure.
STL files are for a PSU of 170x85x40mm (I'm using this one).
But source file (power_supply_holder.scad) is provided if you want to ajust it to different PSU sizes.
There is two STL provided for front holder: one for basic microcube, and another one ("narrow") compatible with a second z axis on the front side of the printer.
Instructions:
Print a rear holder and front holder
Clip them in the microcube structure
Fix the holders with zip ties.
Put the PSU
Block the PSU using two zip ties on the bottom of each holder
STL files are for a PSU of 170x85x40mm (I'm using this one).
But source file (power_supply_holder.scad) is provided if you want to ajust it to different PSU sizes.
There is two STL provided for front holder: one for basic microcube, and another one ("narrow") compatible with a second z axis on the front side of the printer.
Instructions:
Print a rear holder and front holder
Clip them in the microcube structure
Fix the holders with zip ties.
Put the PSU
Block the PSU using two zip ties on the bottom of each holder