Thingiverse
PSU Fan Support for Anet stock PSU by danlotano
by Thingiverse
Last crawled date: 4 years ago
Simple and easy to print 80mm fan holder/support for Anet or similar 3D printers stock PSU.
You will only need a M3x10 bolt+nut to secure the support to the right side of the fan and you will use same screw that there is in the left side of the PSU.
Fan gets power from the PSU itself
Be sure to unplug it before you try to mount this!
You will only need a M3x10 bolt+nut to secure the support to the right side of the fan and you will use same screw that there is in the left side of the PSU.
Fan gets power from the PSU itself
Be sure to unplug it before you try to mount this!