Prusa Original i3 Mk2 Cable Chains MK2S X-Axis Mount Kit by kraq

Last crawled date: 3 years ago

Version 2:
Updated the design to include a hard stop to keep the first link from flipping all the way over, Rounded the corners on the first link to make them more cable friendly.
Only the "V2 - Carrage Extension" and the "V2 - First link" need to be be reprinted to upgrade.
the following issues remain:
extension can still get jammed on the upper frame if you are all they way to the left or right on the x axis (due to the rounded edge on the frame).
Version 1:
the following issues remain:
extension can still get jammed on the upper frame if you are all they way to the left or right on the x axis (due to the rounded edge on the frame).
Unlike the old version there is no hard stops that will stop the first link from rolling over beyond safe limits. I put a 3mm piece of filament in the cable track in order to keep it from rolling all the way over.
I love the https://www.thingiverse.com/thing:1725591 cable chains but they did not fit the new MK2S X axis carrier, so I designed this kit to make it fit.
Note: you will not need to modify your RAMBo cover, the fist link holder is designed to tilt on the bolt, so do not over tighten.
You will need 1 extra 40mm screw, and 1 nut, from the prusa extra parts bag that came with your kit.