Thingiverse
Prusa MK2/MK2S/MK2.5S ext. driver board box by toto99303
by Thingiverse
Last crawled date: 4 years, 8 months ago
This box is designed to fit my external driver board for the original Prusa MK2/MK2S/MK2.5S printers.
It's is an external stepper driver board for X and Y stepper motors of the original Prusa MK2/MK2S/MK2.5S printers. It allows usage of TMC2100 (Silent Step Stick and similar) drivers, so your printer will become a lot quieter and much smoother due to the 256 step interpolation (same as on the MK3).
UPDATE!! 28.04.2018
I made 6mm shorter version of the box, because it turned out I used custom front and rear brackets for the Y axis and they are taller than the original ones. So If you're still using original MK2S parts use the SHORTER VERSION of the box!
More information about the board here:
https://vmod.space/product/prusa-mk2s-ext-driver-board-rev2-3/
https://vmod.wordpress.com/prusa-mk2s-ext-driver-board/
You will need some supports to print the box.
I've included versions without the voltmeter and without the Noctua fan.
Noctua fan should be 40x40x10, 12V.
It's is an external stepper driver board for X and Y stepper motors of the original Prusa MK2/MK2S/MK2.5S printers. It allows usage of TMC2100 (Silent Step Stick and similar) drivers, so your printer will become a lot quieter and much smoother due to the 256 step interpolation (same as on the MK3).
UPDATE!! 28.04.2018
I made 6mm shorter version of the box, because it turned out I used custom front and rear brackets for the Y axis and they are taller than the original ones. So If you're still using original MK2S parts use the SHORTER VERSION of the box!
More information about the board here:
https://vmod.space/product/prusa-mk2s-ext-driver-board-rev2-3/
https://vmod.wordpress.com/prusa-mk2s-ext-driver-board/
You will need some supports to print the box.
I've included versions without the voltmeter and without the Noctua fan.
Noctua fan should be 40x40x10, 12V.