Prusa MK2 i3 Action Sport Camera build plate Camera mount by Tantalus

Last crawled date: 3 years ago

The camera mount was inspired by the Prusa i3 MK2 Sports Camera Holder created by mikolaszuza I modified it for the apeman Action Sports Camera model A70.
I alternated the design has a safety feature to stop the holding fixture from being inserted into the Y-Carriage to deep this stops the camera hitting the extruder when the printer is calibrating.
I also added a flat tooth gear pitched at 10-degree increments so fine adjustments can be made to the camera position.
I have included a Left and Right handed versions of the camera bracket so you can mount the camera either on the left or the right of the build plate.
I have also included 3 versions of the nut they have 3 different cosmetic finish to the nut, plan, Strips & Arrows.
I am willing to modify the design for other makes of cameras as long as you provide measurements of the footprint of your camera I will then add some tolerance for good measure.
Dimensions:
Footprint for Apeman Sports Camera A70 is (59.90x25)