Prusa MINI Top Mount Spool Holder

Last crawled date: 5 years, 3 months ago

I first tried mounting the spool on the side of Z-axis, but it became unstable and I didn't want to stop there. I found a way to mount the spool on the top of the Z-axis, and now have conveinent printer package.
I used this spool holder and created a base and filament guide for it.
Hardware:
Spool bolt:
5/16" bolt (length depends on bolt size, add 28mm to length to mount, up to 35mm will fit)
5/16" nut
One M3x10 screw to keep the filament guide in place (optional, but works better with).
Attaches to the 3030 frame with an M5x12 and t-slot nut (same as the Prusa MINI handle and other accessories).
Print details - PrusaSlicer .15 detail
PETG
Layer height: 0.15
Infill: 15% gyroid
Perimiters: 2
Print the bracket upside down for support free printing.
Printed on the MINI, for the MINI