Thingiverse
Prusa i3 MK3 x-ends for RepRap Samuel by jvstein
by Thingiverse
Last crawled date: 4 years, 8 months ago
These are the Prusa i3 MK3 x-ends, with changes for the RepRap Samuel.
parameterized spacing between z-axis holes (set to 30mm for Samuel)
parameterized the lead nut holes (PCD of 16mm and diameter of 10mm for mine)
Source: https://github.com/jvstein/Original-Prusa-i3
NOTE: If you adjust the z-axis holes, you will need to adjust the 45 degree angle cuts in the x-end-idler.scad and x-end-motor.scad files.
parameterized spacing between z-axis holes (set to 30mm for Samuel)
parameterized the lead nut holes (PCD of 16mm and diameter of 10mm for mine)
Source: https://github.com/jvstein/Original-Prusa-i3
NOTE: If you adjust the z-axis holes, you will need to adjust the 45 degree angle cuts in the x-end-idler.scad and x-end-motor.scad files.