Thingiverse
Prusa i3 MK2 with Dyze Design DyzeXtruder GT and DyzEnd-X by DyzeDesign
by Thingiverse
Last crawled date: 3 years ago
Prusa i3 MK2 with Dyze Design Products
Simple add-on bracket for DyzeXtruder GT and DyzEnd-X
Please note that our 500°C has compatibility issues with 12V systems using the Mini-Rambo. You'll need to either:
Use a 300° thermistor
Use a different electronic board
Use 24V Prusa
Hardware required
M3 x 18 screw
2 * M3 x 16 screw
M3 x 10 screw
Firmware
Hex files are available for direct upload to your board.
Simple add-on bracket for DyzeXtruder GT and DyzEnd-X
Please note that our 500°C has compatibility issues with 12V systems using the Mini-Rambo. You'll need to either:
Use a 300° thermistor
Use a different electronic board
Use 24V Prusa
Hardware required
M3 x 18 screw
2 * M3 x 16 screw
M3 x 10 screw
Firmware
Hex files are available for direct upload to your board.
Similar models
thingiverse
free
DyzEnd X, DyzeXtruder and DyzeXtruder GT Hotend Fan Shroud - Duct by DyzeDesign
...ight version or the left version. this is the position from the face of the extruder.
parts needed:
-50mm blower fan
-m4x20 screw
grabcad
free
DyzeXtruderGT+DyzEnd
...dyzextrudergt+dyzend
grabcad
dyzextruder-gt extruder and dyzend-x hotend kit by dyzedesigns
thingiverse
free
Ultimaker carriage for DyzeXtruder GT and DyzEnd-X - Bowden and direct by DyzeDesign
...er gt and dyzend-x on a ultimaker and original plus.
you will need 4 m3 nuts.
for the bowden version, you also need a m8 hex nut.
thingiverse
free
DyzeXtruder Direct-Drive Mount for Ender 3 by 3DQue
...ardware:
4x m3 x 14 (m3 x 16 should work too if you have some m3 washers)
2x m3 x 4
2x m3 heat set inserts (~5mm od, ~3mm depth)
thingiverse
free
DyzEnd and DyzeXtruder Hotend Fan Shroud - Duct by DyzeDesign
...esign
thingiverse
this fan shroud is made to be used with both dyzend hotend and dyzextruder extruder.
two 40mm fans are needed.
thingiverse
free
Prusa i3 MK2s 3D Printer mosfet box by 3Dplanner
...or mounting the mosfetholder on the electronics housing. just drill two m3 holes in the electronics housing of the prusa i3 mk2s
thingiverse
free
Handle for Ikea Lack Prusa I3 MK2 enclosure by mariuschirita
... i3 mk2 enclosure by mariuschirita
thingiverse
holes are for m3 screws. would suggest using m3 washers and m3 self locking nuts.
thingiverse
free
Runcam/Mobius mount for Prusa i3 MK2. by jszewczyk
...yk
thingiverse
runcam/mobius mount for prusa i3 mk2.
you will need two m3 screws with nuts, some ca glue and double-sided tape.
thingiverse
free
M5 T-nut for Prusa i3 MK2 by stanoba
...t allows to use m5 threaded rod instead of trapezoidal screw in original prusa i3 mk2 x-end-motor and x-end-idler printed parts.
thingiverse
free
DyzeXtruder Adaptor Plate for Prusa i3 by DyzeDesign
...rusa i3.
one is designed to work with bearing block.
the other is made to work with round bearings and cable-ties to secure them.
Dyzedesign
thingiverse
free
Ultimaker carriage for DyzeXtruder and DyzEnd by DyzeDesign
...ebsite for more information on firmware and installation:http://dyzedesign.com/support/preconfigured-printers/printers/#ultimaker
thingiverse
free
DyzEnd and DyzeXtruder Hotend Fan Shroud - Duct by DyzeDesign
...esign
thingiverse
this fan shroud is made to be used with both dyzend hotend and dyzextruder extruder.
two 40mm fans are needed.
thingiverse
free
DyzeXtruder Adaptor Plate for Prusa i3 by DyzeDesign
...rusa i3.
one is designed to work with bearing block.
the other is made to work with round bearings and cable-ties to secure them.
thingiverse
free
Ultimaker carriage for DyzeXtruder GT and DyzEnd-X - Bowden and direct by DyzeDesign
...er gt and dyzend-x on a ultimaker and original plus.
you will need 4 m3 nuts.
for the bowden version, you also need a m8 hex nut.
thingiverse
free
DyzEnd X, DyzeXtruder and DyzeXtruder GT Hotend Fan Shroud - Duct by DyzeDesign
...ight version or the left version. this is the position from the face of the extruder.
parts needed:
-50mm blower fan
-m4x20 screw
thingiverse
free
CoreXY Gantry with BLTouch by makerparts
...for my corexy machine, using bltouch abl sensor and dyzedesign extruder and...
thingiverse
free
DUAL DyzEnd Pro Mount for Ender 5 by lysithea81
...firmware modifications to make; you can get those from dyzedesign#39;s website. once you have your firmware.bin file, simply place...
grabcad
free
DyzeXtruderGT+DyzEnd
...dyzextrudergt+dyzend grabcad dyzextruder-gt extruder and dyzend-x hotend kit by dyzedesign ...
Dyzextruder
thingiverse
free
DyzEnd X, DyzeXtruder and DyzeXtruder GT Hotend Fan Shroud - Duct by DyzeDesign
...ight version or the left version. this is the position from the face of the extruder.
parts needed:
-50mm blower fan
-m4x20 screw
thingiverse
free
DyzeXtruder InductiveSensor Bracket by Eriobis
...ingiverse
this is a bracket for pl-08n inductive sensor and the dyzextruder.
you may have to drill the holes a little bit bigger
thingiverse
free
Ultimaker carriage for DyzeXtruder and DyzEnd by DyzeDesign
...ebsite for more information on firmware and installation:http://dyzedesign.com/support/preconfigured-printers/printers/#ultimaker
thingiverse
free
DyzEnd and DyzeXtruder Hotend Fan Shroud - Duct by DyzeDesign
...esign
thingiverse
this fan shroud is made to be used with both dyzend hotend and dyzextruder extruder.
two 40mm fans are needed.
thingiverse
free
DyzeXtruder Adaptor Plate for Prusa i3 by DyzeDesign
...rusa i3.
one is designed to work with bearing block.
the other is made to work with round bearings and cable-ties to secure them.
thingiverse
free
DyzeXtruder Direct-Drive Mount for Ender 3 by 3DQue
...ardware:
4x m3 x 14 (m3 x 16 should work too if you have some m3 washers)
2x m3 x 4
2x m3 heat set inserts (~5mm od, ~3mm depth)
thingiverse
free
Ultimaker carriage for DyzeXtruder GT and DyzEnd-X - Bowden and direct by DyzeDesign
...er gt and dyzend-x on a ultimaker and original plus.
you will need 4 m3 nuts.
for the bowden version, you also need a m8 hex nut.
thingiverse
free
DyzeXtruder GT Mount for OpenBeam Kossel Pro by unlimitedbacon
...for openbeam kossel pro by unlimitedbacon
thingiverse
print two of these. one goes on top, one goes on bottom.
design on onshape
thingiverse
free
DyzeXtruder Carriage for PrusaI3 by Eriobis
...s too.
it works with the fanduct, otherwise the distances will be off
good thing about it : it raises the head about 30mm higher.
thingiverse
free
TEVO Black Widow DyzEND-X + DyzeXtruder GT dual MGN12 Mount by iggut
...his sits very close to the hotend and pla will sag a bit. i recommend using petg or abs.
mounts holds:
bltouch
1x 4010 blower fan
Dyzend
thingiverse
free
Dondolo Pendulum for DyzEND-X hotends by BigSteve
...e
this is the pendulum part of the dondolo extruder for dyzend-x hotends.
video of the first print: https://youtu.be/oy8cmhgkhws
thingiverse
free
Ultimaker carriage for DyzeXtruder and DyzEnd by DyzeDesign
...ebsite for more information on firmware and installation:http://dyzedesign.com/support/preconfigured-printers/printers/#ultimaker
thingiverse
free
DyzEnd and DyzeXtruder Hotend Fan Shroud - Duct by DyzeDesign
...esign
thingiverse
this fan shroud is made to be used with both dyzend hotend and dyzextruder extruder.
two 40mm fans are needed.
thingiverse
free
Ultimaker carriage for DyzeXtruder GT and DyzEnd-X - Bowden and direct by DyzeDesign
...er gt and dyzend-x on a ultimaker and original plus.
you will need 4 m3 nuts.
for the bowden version, you also need a m8 hex nut.
thingiverse
free
Dyzend X part cooling fan 25mm
...s way your overhangs and bridging come out clean. install it opposite of your heat sink cooling fan. preferably on the back side.
thingiverse
free
DyzEnd X, DyzeXtruder and DyzeXtruder GT Hotend Fan Shroud - Duct by DyzeDesign
...ight version or the left version. this is the position from the face of the extruder.
parts needed:
-50mm blower fan
-m4x20 screw
thingiverse
free
DyzEND HOTEND Support for Printrbot Simple Metal by pturcotte
...improve it if needed. all you need to do is print both parts, glue them together with a bit of superglue or ca and it will work.
thingiverse
free
Dondolo 2020/2040 Rail Mount & DyzEnd Hotend by ElectroFluxSS
...d to be replaced with the dyze dyzend.
i have some comments on the original thing regarding the servo (8v) and some other tweaks.
thingiverse
free
TEVO Black Widow DyzEND-X + DyzeXtruder GT dual MGN12 Mount by iggut
...his sits very close to the hotend and pla will sag a bit. i recommend using petg or abs.
mounts holds:
bltouch
1x 4010 blower fan
Dyze
thingiverse
free
FT-5 3D printer Dyze extruder/hotend adapter by cjc0306
... dyze extruder/hotend adapter by cjc0306
thingiverse
this an adapter plate for an ft-5 printer to accept a dyze extruder/hotend.
thingiverse
free
Mgn Mod Dyze EndX Carriage by oozzoo
... my x carriage designed for use with the dyze endx atm.
further changes will be updated.
for more information if needet ask me ;)
thingiverse
free
Adapter for Radial FAN for DYZE Extruder by Sammy59
...os, this adapter is to install the radial fan of my hephestos to the extruder
but in real this can be used for any bowden extrude
thingiverse
free
creality ender 3 dyze direct extruder with bl touch mount
...holes in the base so i adapted the file with the cr10 fom hwdesigns as an example. i also included a bl touch mount in this file.
thingiverse
free
BL Touch support for Dyze Extruder by Tiktiki
...igh-temp materials (abs, nylon, polycarbonate etc.)
included the step files to import into cad software.
made with inventor 2016.
thingiverse
free
Modular Mount for Dyze Hot End by TacklessWookie
...ything else i've designed printed i can help. i specialize in hips and abs printing for strong parts. just send me a message.
thingiverse
free
Chariot for Dyze extruder on Prussa I3 by frednet
...d one higher to give more vertical clearance for your prints
lm8uu bearing, 45mm distance center to center between 8 mm rail bars
thingiverse
free
Dondolo 2020/2040 Rail Mount & DyzEnd Hotend by ElectroFluxSS
...d to be replaced with the dyze dyzend.
i have some comments on the original thing regarding the servo (8v) and some other tweaks.
thingiverse
free
Direct drive carriage for D-BOT C-BOT by Tiktiki
...allows to install prusa i3-style direct extruders, like the dyze or wade, that mount the hot-end to the extruder...
Mk2
turbosquid
$4
Mk2
...
royalty free 3d model mk2 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1305687)
turbosquid
$9
Mk2 Grenade
...osquid
royalty free 3d model mk2 grenade for download as fbx on turbosquid: 3d models for games, architecture, videos. (1175401)
turbosquid
$4
Mk2 Grenade
...quid
royalty free 3d model mk2 grenade for download as blend on turbosquid: 3d models for games, architecture, videos. (1228888)
turbosquid
$2
mk2 Grenade
...osquid
royalty free 3d model mk2 grenade for download as fbx on turbosquid: 3d models for games, architecture, videos. (1329079)
turbosquid
$2
GRENADE MK2
...osquid
royalty free 3d model grenade mk2 for download as fbx on turbosquid: 3d models for games, architecture, videos. (1202615)
turbosquid
$2
Grenade Mk2
...osquid
royalty free 3d model grenade mk2 for download as max on turbosquid: 3d models for games, architecture, videos. (1658201)
turbosquid
$75
Lanchester Mk2
...alty free 3d model lanchester mk2 for download as 3ds and max on turbosquid: 3d models for games, architecture, videos. (1497085)
turbosquid
$10
MK2 helmet
...
royalty free 3d model mk2 helmet for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1371428)
turbosquid
$10
Grenade MK2
...royalty free 3d model grenade mk2 for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1146970)
turbosquid
free
MK2 Grenade
...
free 3d model mk2 grenade for download as png, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1225336)
I3
3d_export
$10
suv i3
...suv i3
3dexport
suv i3 2013 series
3d_ocean
$89
BMW i3 2012
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
cg_studio
$99
BMW i3 20143d model
...
cgstudio
.3ds .c4d .fbx .lwo .max .obj - bmw i3 2014 3d model, royalty free license available, instant download after purchase.
cg_studio
$99
BMW i3 20123d model
...tudio
.3ds .c4d .fbx .lwo .max .mb .obj - bmw i3 2012 3d model, royalty free license available, instant download after purchase.
cg_studio
$99
BMW i3 20143d model
...tudio
.3ds .c4d .fbx .lwo .max .mb .obj - bmw i3 2014 3d model, royalty free license available, instant download after purchase.
humster3d
$75
3D model of BMW i3 2014
...
buy a detailed 3d model of bmw i3 2014 in various file formats. all our 3d models were created maximally close to the original.
humster3d
$40
3D model of Kitchen Set I3
...uy a detailed 3d model of kitchen set i3 in various file formats. all our 3d models were created maximally close to the original.
3d_ocean
$30
Kitchen set i3
...ensils oven plates shelves sink table ware
kitchen set i3 include 3d models: cooker, oven, sink, cupboards, table, chair, plates.
3d_ocean
$89
BMW i3 2014
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
cg_studio
$99
BMW i3 Concept 20113d model
...i3
.3ds .c4d .fbx .lwo .max .obj - bmw i3 concept 2011 3d model, royalty free license available, instant download after purchase.
Prusa
turbosquid
$2
Frame Filament Guide Clip-On for Prusa Mk3
...rame filament guide clip-on for prusa mk3 for download as stl on turbosquid: 3d models for games, architecture, videos. (1634730)
3d_export
free
prusa i3 mk3s laser mount for opt lasers
...to learn more about the blue laser technology that conceived the cutting and engraving laser heads from opt lasers, please visit:
turbosquid
free
Prusa small printer adapter holder
...er for download as ipt, skp, dwg, dxf, fbx, ige, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1642936)
3d_export
$30
geisha by jonathan adler
...** i did a 3d printing test in the prusa software, you can find it among the attached images.<br>exchange:<br>.blend...
thingiverse
free
Prusa without Prusa (rc2) by madless
...prusa without prusa (rc2) by madless
thingiverse
just the main part of prusa rc2 faceshield, without writing.
enjoy :)
thingiverse
free
Prusa by acejbc
...prusa by acejbc
thingiverse
prusa knob info
m3 8mm screw
thingiverse
free
Prusa house
...prusa house
thingiverse
how prusa house could look like...
thingiverse
free
Prusa Mk2 "Fake Prusa" LCD cover by anraf1001
...r by anraf1001
thingiverse
version of prusa's lcd cover with "fake prusa" instead of "original prusa"
thingiverse
free
Prusa stabilizator by gutiueugen
...prusa stabilizator by gutiueugen
thingiverse
prusa stabilizator
thingiverse
free
Keychain Prusa by rbarbalho
...keychain prusa by rbarbalho
thingiverse
keychain with text prusa.
Gt
3d_export
$20
gt
...gt
3dexport
gt
design_connected
$13
GT
...gt
designconnected
santa & cole gt computer generated 3d model. designed by santa & cole team.
3ddd
$1
Eliot >> SATIS
...eliot >> satis
3ddd
satis
итальянский диван eliot >> satis
длина 208.00 см
ширина 101.00 см
высота 87.00 см
3d_export
$30
Nissan GT
...nissan gt
3dexport
nissan gt
turbosquid
free
Bela GT Targa, GTS, GTR
...a gt targa, gts, gtr for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1148167)
3d_export
free
f0rd gt
...f0rd gt
3dexport
turbosquid
$59
Tesla GT
...free 3d model tesla gt for download as max, lwo, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1301356)
turbosquid
$49
Maserati GT
...e 3d model maserati gt for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1219908)
turbosquid
$40
Star GT
...ree 3d model star gt for download as blend, dae, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1599912)
turbosquid
$10
Ford Gt
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Design
3ddd
$1
LINE DESIGN (Doors Design)
...line design (doors design)
3ddd
дверь
modern doors design - line design concept
turbosquid
$5
designer
...alty free 3d model designer for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1422665)
3ddd
$1
VER DESIGN
...ver design
3ddd
ver design
кресло ver design
3ddd
$1
VER DESIGN
...ver design
3ddd
ver design
диван ver design
3ddd
$1
Bagno design
...bagno design
3ddd
bagno design , унитаз
санитария bagno design
3ddd
free
VER DESIGN
...ver design
3ddd
ver design , стеллаж
полка ver design
3ddd
$1
VER DESIGN
...ver design , лежак , шезлонг
шезлонг ver design
3d_export
free
designer
..., trees and much more. the model has 3 types of parts: - 4 cells - 6 cells - 8 cells the *.max file contains 5 colored materials.
3d_export
$19
level design
...level design
3dexport
you can use this design (level design) in your own game.
3d_export
$7
Crusher design
...crusher design
3dexport
crusher design