Prusa i3 MK2 Remix (2020 profile) by brydon1593

Last crawled date: 3 years ago

Here is a Remix to http://www.thingiverse.com/thing:1692666
All the piece are for the 2020 profile
-Z axis uploaded (18/12/16)
8mm straight rod
8mm Acme or 8MM threaded rod
5mm holes (mounting)
8x22x7 bearings (608ZZ)
17mm space between z-straight rod and threaded rod
works with http://www.thingiverse.com/thing:1103976 (x-axis)
X axis Uploaded (20/12/16)
3mm screws for (all small holes)
Acme bolt with two screw holes
2 x LM8UU bearings
8mm Straight rod
-Tensioner
M3 x 35mm (or 40mm) bolt
8x22x7 bearings (608ZZ)
2 x M3 nut
M3 x10/15mm bolt
Corner stand offs (02/01/17)
3 x M5 x 10mm bolt
3 x M5 T-nut
X-carriage (02/01/17)
3 x LM8UU bearings
6 x Zip ties (mounting bearings)
*M5 mounting holes
2 Zip ties (for GT2 belt)
-Blower fan shroud
-extruder bracket
-Y Axis Uploaded (05/01/17)
4 x bed bearings (LM8UU)
8 x M3 x 10mm
8 x M3 nuts
-Motor mount
3 x M3 5mm/10mm bolts
2 x M5 10mm bolts

Pulley wheel
8x22x7 bearings (608ZZ)
M5 x 20mm bolt
M5 Nut
2 x washers
2 x M5 x 10mm bolts
2 x M5 T-nuts


Bed connecters
3 x M3 x 15mm bolts
3 x M3 Lock nuts

straight rod (rails)
8 x M5 x 10mm bolts
8 x M5 T-nuts
HARDWARE:
2 x 8mm ACME rods (300mm or 400mm)
2 x 8mm ACME flange nuts (4 mounting holes)
2 x 8mm Straight rods (300mm or 400mm)
2 x 8mm Straight rods (500mm or 600mm)
2 x 8mm Straight rods (480mm)
3.5M GT2 Belt
4 x Nema 17 motors
1 x Bulldog Lite (optional)
1 x E3D V6 (optional)
1 x BLtouch (optional)
1 x 12V blower fan
2 x mechanical endstops (3 if you do not use BLtouch)
Main board
RUMBA or RAMPS or anything you like
FRAME
2020 all profiles
2 x 600mm profile
5 x 500mm profile
8 x Corner brackets