Thingiverse
Prusa filament spool holder by Phizinza by Phizinza
by Thingiverse
Last crawled date: 4 years, 7 months ago
I saw JBFromOz's spool holder but wanted something a little different and designed this.
The arms click in simply, but it needs to be printed at an angle on the bed one arm at a time to fit. I had no trouble with warping on glass with ABS Juice.
The spool holder arms allow for 260mm diameter spools.
The spool spindles are designed to take spools with holes from 24 to 40mm diameter. They can be fitted with a standard 608 bearing (most commonly a skate bearing).
Hardware needed,
8mm threaded rod
A few 8mm nuts
Additionally: 2 x 608 bearings.
The arms click in simply, but it needs to be printed at an angle on the bed one arm at a time to fit. I had no trouble with warping on glass with ABS Juice.
The spool holder arms allow for 260mm diameter spools.
The spool spindles are designed to take spools with holes from 24 to 40mm diameter. They can be fitted with a standard 608 bearing (most commonly a skate bearing).
Hardware needed,
8mm threaded rod
A few 8mm nuts
Additionally: 2 x 608 bearings.