Thingiverse
Proxxon FET Guide by USG
by Thingiverse
Last crawled date: 4 years, 4 months ago
[Update 2020-10-06]
I added stop clamps for the left and right side.
[Update 2020-10-03]
At the request of a user, I added a version with stabilizers.
Please measure first the distance of the guides and the upper guide width.
My FET has a guide distance of 115 mm and a width of 8.3 mm.
I designed the saw guide so that small workpieces can easily be sawed at right angles.
Please note that the saw blade cannot be fully extended.
First check it with the machine switched off.
I use this saw guard.https://www.thingiverse.com/thing:4570630
I added stop clamps for the left and right side.
[Update 2020-10-03]
At the request of a user, I added a version with stabilizers.
Please measure first the distance of the guides and the upper guide width.
My FET has a guide distance of 115 mm and a width of 8.3 mm.
I designed the saw guide so that small workpieces can easily be sawed at right angles.
Please note that the saw blade cannot be fully extended.
First check it with the machine switched off.
I use this saw guard.https://www.thingiverse.com/thing:4570630