Thingiverse
Prototyping harness for ESP12E by ycomet
by Thingiverse
Last crawled date: 3 years, 5 months ago
I was looking for a prototyping harness to quickly test new setups and flash multiples ones in little time.
You just need to slide some pins in the pre-drilled holes on both upper and lower bodies and secure them with some sort of glue - I used watch spring pins as I had those readily available, but needle spring pins will work even better.
Once that is done you can simply sandwich your ESP12E in and secure it with the retainer clips.
You just need to slide some pins in the pre-drilled holes on both upper and lower bodies and secure them with some sort of glue - I used watch spring pins as I had those readily available, but needle spring pins will work even better.
Once that is done you can simply sandwich your ESP12E in and secure it with the retainer clips.
Similar models
thingiverse
free
4 pin trailer wiring harness mount (vehicle side) by MarvsWRX
...e end of a 4-pin trailer wiring harness on the vehicle side. i printed it out in petg and recommend petg of other tough filament.
thingiverse
free
D1M BLOCK - ESP12 by IOT123
...ing, and 2 off 8 pin 10mm long needle female pin header strip are required for this build.
instructions
code examples
d1m blocks
thingiverse
free
Interlocking Yondu Prototype Fins *UPDATED* by Unknown_Assassin97
...h i added some pins to help with securing the pieces together.
updated
i have now tweaked the pins to where they should now work.
3dwarehouse
free
Spring plunger slotted with pressure pin...secured - steel - M4 standard spring
...th pressure pin and long-lok secured - steel #03000__indexing_and_locating #03021104 #green_standard_tooling #norelem #traceparts
3dwarehouse
free
Spring plunger slotted with pressure pin...secured - steel - M16 standard spring
...th pressure pin and long-lok secured - steel #03000__indexing_and_locating #03021116 #green_standard_tooling #norelem #traceparts
3dwarehouse
free
Spring plunger slotted with pressure pin...secured - steel - M10 standard spring
...th pressure pin and long-lok secured - steel #03000__indexing_and_locating #03021110 #green_standard_tooling #norelem #traceparts
3dwarehouse
free
Spring plunger slotted with pressure pin...secured - steel - M5 standard spring
...th pressure pin and long-lok secured - steel #03000__indexing_and_locating #03021105 #green_standard_tooling #norelem #traceparts
3dwarehouse
free
Spring plunger slotted with pressure pin...secured - steel - M6 standard spring
...th pressure pin and long-lok secured - steel #03000__indexing_and_locating #03021106 #green_standard_tooling #norelem #traceparts
3dwarehouse
free
Spring plunger slotted with pressure pin...secured - steel - M8 standard spring
...th pressure pin and long-lok secured - steel #03000__indexing_and_locating #03021108 #green_standard_tooling #norelem #traceparts
3dwarehouse
free
Spring plunger slotted with pressure pin...secured - steel - M12 standard spring
...th pressure pin and long-lok secured - steel #03000__indexing_and_locating #03021112 #green_standard_tooling #norelem #traceparts
Ycomet
thingiverse
free
Toxic warning coaster - dual extrusion by ycomet
...h nozzles.
careful on the first layer to avoid color contamination. for the other layers, the outer ring works as an ooze shield.
thingiverse
free
Flammable warning coaster - dual extrusion by ycomet
...th nozzles.
careful on the first layer to avoid color contamination. for the other layers, the outer ring works as a ooze shield.
thingiverse
free
Biohazzard warning coaster - dual extrusion. by ycomet
...th nozzles.
careful on the first layer to avoid color contamination. for the other layers, the outer ring works as a ooze shield.
thingiverse
free
Radioactive Trefoil Coaster (dual extruder) by ycomet
...th nozzles.
careful on the first layer to avoid color contamination. for the other layers, the outer ring works as a ooze shield.
thingiverse
free
Suporte de dispositivo Via Verde by ycomet
...er and pla would probably melt.
update: tested both pla and abs. don't bother printing pla because it gets soft very quickly.
thingiverse
free
45 deg drill guide by ycomet
...nated escape hole - instead just gets into the bearings. keep this in your mind if you're thinking about printing the design.
thingiverse
free
Wristwatch back cover press by ycomet
...ed with the rod insert facing down (or up) for the same reason
apply some lubricant to the rod to make the rotation even smoother
thingiverse
free
Folded lamp shade spotlight for GU 5.3 bulb by ycomet
...tch fire.
update 21/02/2018
modified the top cover a bit to give some extra room for the wires
changed recommended print settings
Esp12E
thingiverse
free
D1M BLOCK - ESP12 by IOT123
...ing, and 2 off 8 pin 10mm long needle female pin header strip are required for this build.
instructions
code examples
d1m blocks
thingiverse
free
ESP12 Pogo Adapter by pbwns20
...ft, then on the right to prevent heating the plastic too much. let it cool a bit. then turn around in the vise for the other side
thingiverse
free
Socket ESP8266 (ESP12E) by fandres7_7
...ions
based on the work of wdwhite
step file by by_andrey_chirva
see commit details to find the authors of each part.
@fandres7_7
thingiverse
free
CurrentCost ESP12E circuitry box (CC128, EnviR) by saturno
...unication from the energy sensor is received by the esp12.
the code is highly based on the shared project form dontnetdann, here.
thingiverse
free
ESP12 (E/F) Programming Clamp by madtheos
...pport the move to metric, but 2 mm pin pitch certainly does make the esp12 hard to breadboard for programming. hence this design.
thingiverse
free
ESP12 Soldering free connection thing by kungfux
...e
header pins are made from paper clips. paperclips rod diameter is .8mm, so i made holes same diameter, so they fit very tight.
thingiverse
free
ESP12 holder - slim, medium and large by jhawkn8r
...out. the other two should allow for you to house the wires entirely in the box and route them out one of the two holes.
enjoy!
thingiverse
free
ESP12-E Wireless Clock - WS2812b housing by gunkl
...as a wifi time synced clock. github source code: https://github.com/gunkl/esp12eclock the current binary for the clock is here: https://s3-us-west-1.amazonaws.com/ds01222018-mypublicbucket/public/esp-clock12.ino.bin...
thingiverse
free
ESP12 project box by bobtidey
...e a good current (80ma) through the led.
the ds18b20 cable parts allow the sensor to be a bit remote and avoid any local warming.
Harness
3ddd
$1
Horse harness puff
...horse harness puff
3ddd
пуф
horse harness puff
turbosquid
$30
Saddle Greek Mycenaean Bridle Harness
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$7
double harness bend with parallel ends
... parallel ends for download as dae, obj, x, stl, fbx, and 3ds on turbosquid: 3d models for games, architecture, videos. (1666254)
turbosquid
$9
VD - H07V-R 95mm2 HAR brown.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
VD - H07V-R 70mm2 HAR brown.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
VD - H07V-R 50mm2 HAR brown.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
VD - H07V-R 35mm2 HAR brown.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
VD - H07V-R 25mm2 HAR brown.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
VD - H07V-R 16mm2 HAR brown.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
VD - H07V-R 10mm2 HAR brown.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Prototyping
3ddd
$1
iphone (prototype)
...e (prototype)
3ddd
iphone prototype телефон сотовый прототип , iphone
iphone (prototype)
turbosquid
$60
prototype
...y free 3d model prototype for download as , fbx, stl, and obj on turbosquid: 3d models for games, architecture, videos. (1516333)
turbosquid
free
prototype
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Prototype Crossbow
...squid
free 3d model prototype crossbow for download as blend on turbosquid: 3d models for games, architecture, videos. (1237541)
turbosquid
$25
Atlas Prototype
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Prototype Airplane
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
starship prototype
...y manufactured in boca chica ,texas by spacex. this prototype consist features like forward flaps, bottom flaps and landing legs.
design_connected
$11
Jellyfish Chandelier (prototype)
...sakai design associate jellyfish chandelier (prototype) pendant lights computer generated 3d model. designed by toshihiko sakai.
turbosquid
free
Prototype Plasma Rifle
...d
free 3d model prototype plasma rifle for download as blend on turbosquid: 3d models for games, architecture, videos. (1237576)
turbosquid
$15
Prototype CNC Router
... model prototype cnc router for download as iam, ige, and stl on turbosquid: 3d models for games, architecture, videos. (1667298)