Thingiverse
Prop Balancer by Bsand1215
by Thingiverse
Last crawled date: 3 years ago
Designed for 5" props and smaller
Print 2 Bases, 2 Posts, 2 Zeroers, and 1 Base Connector
Requires:
2X 0.7" magnets 0.196" deep
1X at least 3" 8-32 Threaded rod
2X 8-32 nuts
The magnets press-fit quite well into the PLA stands, but may require some sanding for a better fit and glue if needed.
To get a point on the ends of the threaded rod, I put one end into a drill and used a belt sander, spinning both the drill and sander to get a nice centered point on the rod. This is required until you have a reasonably sharp point and fits within the stands without creating a lot of friction.
All the parts to the stand are interlocking to mount to the other parts requiring a small amount of super glue.
Print 2 Bases, 2 Posts, 2 Zeroers, and 1 Base Connector
Requires:
2X 0.7" magnets 0.196" deep
1X at least 3" 8-32 Threaded rod
2X 8-32 nuts
The magnets press-fit quite well into the PLA stands, but may require some sanding for a better fit and glue if needed.
To get a point on the ends of the threaded rod, I put one end into a drill and used a belt sander, spinning both the drill and sander to get a nice centered point on the rod. This is required until you have a reasonably sharp point and fits within the stands without creating a lot of friction.
All the parts to the stand are interlocking to mount to the other parts requiring a small amount of super glue.
Similar models
thingiverse
free
Pocket Prop Balancer with Leg by coberdas
...rod from menards. it was a $1.70. see the instructions for the details on how i made the finger balancer. enjoy and have fun!!
thingiverse
free
Movement holder for Pocket Watch by muddtt
...e other. the knob is covering the other nylock nut.
parts list:
8-32 x 3" threaded rod
8-32 nut
(2) 8-32 nylock nut
1/4 rod
thingiverse
free
Dovetail Slot Hardware by theMachinista
...dard dovetail slot for your woodworking jigs. the parts require 10-32 flanged heatserts to finish, and 10-32 threaded rod to use.
thingiverse
free
ACME lead screw Aleph Objects X-ends by LulzBot
... acme rod 36": #98935a817
you will also need to drill out your coupler or print a new one to fit the 3/8" threaded rod.
thingiverse
free
Watch Escapement Desk Toy (8-32) by Dubious20
...her
unf (#8-36) fasteners could be used instead.
a video of this design is on youtube:https://www.youtube.com/watch?v=vnw5qmjbbbq
thingiverse
free
Magnetic curtain rod / towel rack by Busterific
...ued together. i scuffed up the metal backing for the magnets that i used with some sandpaper to make the super glue grip better.
thingiverse
free
Magnetic propeller balance tool by ccarrasco
...r for prop up to 13".
requires 2 10 millimeters magnets.
foldable feets.
body in 0ne or 2 parts (to glue).
works quite well.
thingiverse
free
RoBo3D Y Axis Remix by mkelly
...e bed/plastic. i used 2 part plastic epoxy
suggested material is abs due to bed heat. print at 50% or greater for best results.
grabcad
free
5/8-11 x 5" Rod End Bolt
...om end of threads to center of thru hole axis. rod end thru hole 5/8" diameter x 5/8" thick. 4-1/4" thread length.
thingiverse
free
Overture Spool Winder
... with a power drill. requires 2xm4 nuts and about 125mm of m4 threaded rod. drill adapter fits a 3/8" drill chuck. enjoy.
Bsand1215
thingiverse
free
Proto-X Case by Bsand1215
...oller must be slightly angled to fit properly in the slot.
printed with 10% infill to save on plastic and still holds very sturdy
thingiverse
free
Samsung Wireless Charging Stand Christmas Gift by Bsand1215
...samsung fast charger.
charging pad: https://www.amazon.com/gp/product/b075v234vl/ref=oh_aui_detailpage_o00_s00?ie=utf8&psc=1
thingiverse
free
Quadcopter Wall Mount by Bsand1215
...and has a ridge at the end to prevent the quadcopter from sliding off.
also being used to mount a plane and 2 24" long wings
thingiverse
free
Switchblade 180 Quadcopter by Bsand1215
...fs (or your choice of standoffs)
assortment of provided m3 spacers
p.s. i know my build is messy. i have plans on fixing it soon.
Balancer
3ddd
$1
balance
...balance
3ddd
balance
design_connected
$11
Balance
...balance
designconnected
vibia balance computer generated 3d model. designed by vilardell, jordi.
3ddd
$1
Windfall | Balance
...windfall | balance
3ddd
balance , windfall
люстра windfall balance
3d_export
$5
balance
...balance
3dexport
3ddd
free
Vibia balance
... vibia , balance
vibia balancehttp://www.vibia.com/en
3ddd
$1
Vibia Balance
...vibia balance
3ddd
vibia
vibia balance
turbosquid
$40
balance
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Balance
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Balance
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Balance
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Prop
3ddd
$1
Props
...props
3ddd
props
3d_ocean
$10
Props
...ject you need this props design this 6 taype for props to get your design perfect and nice file include : 1 max 2 obj 3 3ds 4 zip
turbosquid
$15
Props
...s
turbosquid
royalty free 3d model props for download as max on turbosquid: 3d models for games, architecture, videos. (1249032)
turbosquid
$1
PROPS
...d model props for download as unitypackage, obj, fbx, and tga on turbosquid: 3d models for games, architecture, videos. (1627660)
turbosquid
$5
props
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
PROP
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
kids props
...kids props
3ddd
декоративный набор
kids props
3d_ocean
$8
Street props
...l barrier prop roads street street prop
street props game models barrel barrier roads aircos jerrycan models fbx obj and max file
turbosquid
$39
Apocalyptic Props
...uid
royalty free 3d model apocalyptic props for download as on turbosquid: 3d models for games, architecture, videos. (1380028)
turbosquid
$1
Bunker props
...rbosquid
royalty free 3d model bunker props for download as on turbosquid: 3d models for games, architecture, videos. (1196014)