Thingiverse
Prop Balancer by BliNDF123
by Thingiverse
Last crawled date: 3 years, 1 month ago
I ordered a balancer without any stand, so I went to my garage and found parts to model around. I used these 9x2mm magnets: https://www.fasttech.com/p/1140103 and made the space for the magnet to be glued into 10mm in diameter and 2mm deep. The nut and bolt was just something random I found in the garage and I don't know like the actual name for them (like M3, M4, M5) but from flat to flat on the nut is 8.65mm and the bolt is 4mm thick, I made the spot for the nut again 10mm and 3mm deep with the hole for the bolt at 4.5mm. I hope I oversized the spots enough for anyone to be able to find random parts around their house. I made it so there are about 53-54mm of floating space and it's 57mm from magnet to magnet (at most open position on screw).
Another thing, I used this prop balancer from HobbyKing https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=55640 and I don't know if I was sent the wrong one but the ends were flat. I put it on a drill and spun it on a grinding wheel but I might have been better off making one myself with again any random long bolt (head cut off and ends grinded to a point) around the house and some nuts.
Edit: Changed the orientation (it was showing up on it's side).
Another thing, I used this prop balancer from HobbyKing https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=55640 and I don't know if I was sent the wrong one but the ends were flat. I put it on a drill and spun it on a grinding wheel but I might have been better off making one myself with again any random long bolt (head cut off and ends grinded to a point) around the house and some nuts.
Edit: Changed the orientation (it was showing up on it's side).
Similar models
thingiverse
free
Propeller balancer by Theremin
...14927
balance your props!
you'll just need some cubic 5mm strong magnets and a bolt and nut for the table clamp part (m5)
thingiverse
free
Propeller balancer - remix by tophe75
...927
balance your props!
you'll just need some round 9.5mm strong magnets and a bolt and nut for the table clamp part (m5)
thingiverse
free
propeller balancer by MichiKirchi3D
...de with the threaded rod
for balancing i use spray-paint
(i cannot guarantee that it is 100% accurate) but i'm happy with it
thingiverse
free
Balancer by Itek
... 3mm bolts and nuts. you still need a balance shaft and some magnets.
inside distance between towers: 135mm
inside height: 75mm
thingiverse
free
Housing for HK Balancer Boards by svenkonstanzer
...king.com/hobbyking/store/__31848__multi_adapter_all_in_one_balance_board_tp_hp_xh_eh_uk_warehouse_.html?strsearch=multi%20adapter
thingiverse
free
Frog Multi-Function Balancer Adapter by wm13
...tml
adapter für propeller-wuchtgerät von hobbyking. damit lassen sich auch größere props als 12" mit magnetaufnahme wuchten.
grabcad
free
wierd_contraption
...wierd_contraption
grabcad
i found this in my garage. i don't know what it is.
3dwarehouse
free
Random Object
...random object
3dwarehouse
i don't know how i made this, but it turned into this.
thingiverse
free
Very simple yet accurate Magnetic Prop Balancer by KreAture
...etric so any size prop can be handled and you can use any round magnets you have. i recommend 5mm round ones though, 5-10mm long.
thingiverse
free
Prop Balancer for Hard Disk Neodym by willie42
... think - great explanation-video on how to use it:https://youtu.be/-vakwrc86xe
by https://www.thingiverse.com/painless360/designs
Blindf123
thingiverse
free
Board Fin by BliNDF123
...board fin by blindf123
thingiverse
paddle board fin
thingiverse
free
Small Hinge by BliNDF123
...s simple finishing nails to hold it together, also throwing in this other piece i used to hold the little door these hinges hold.
thingiverse
free
Nozzle Removal Tool by BliNDF123
...s to use on my wanhao duplicator i3, but it might work for others. my nozzle is 9mm and the section on the thermal tube is 5.25.
thingiverse
free
Di3 Hex Wrench Holder by BliNDF123
...de a hex wrench holder for the ones that come with the di3, stuck it to the side frame of my printer with some double sided tape.
thingiverse
free
DuckTales Piggy Bank by BliNDF123
...ne posted on a wanhao duplicator i3 group. i have it scaled for a quarter to fit the slot and the main box itself is 186mm tall.
thingiverse
free
Lawn Ornament Back Cover by BliNDF123
... and print a replacement. not sure how many people are going to need such a thing but i went ahead and uploaded it here anyways.
thingiverse
free
Hefty Door Latch by BliNDF123
...oops, if you noticed i had the lh and rh in the names for that latch arms switched, i've since corrected that and reuploaded.
thingiverse
free
Formuler Z7+ TV Mount by BliNDF123
...igner button if you like this design and it works for you, any suggestions or requests to make changes are heard and appreciated.
thingiverse
free
Replacement for Built-In Soap Bar Holder by BliNDF123
...ng the tabs i had to create my own replacement.
the slots measure 70mm apart, so check out that measurement before printing this.
Balancer
3ddd
$1
balance
...balance
3ddd
balance
design_connected
$11
Balance
...balance
designconnected
vibia balance computer generated 3d model. designed by vilardell, jordi.
3ddd
$1
Windfall | Balance
...windfall | balance
3ddd
balance , windfall
люстра windfall balance
3d_export
$5
balance
...balance
3dexport
3ddd
free
Vibia balance
... vibia , balance
vibia balancehttp://www.vibia.com/en
3ddd
$1
Vibia Balance
...vibia balance
3ddd
vibia
vibia balance
turbosquid
$40
balance
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Balance
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Balance
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Balance
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Prop
3ddd
$1
Props
...props
3ddd
props
3d_ocean
$10
Props
...ject you need this props design this 6 taype for props to get your design perfect and nice file include : 1 max 2 obj 3 3ds 4 zip
turbosquid
$15
Props
...s
turbosquid
royalty free 3d model props for download as max on turbosquid: 3d models for games, architecture, videos. (1249032)
turbosquid
$1
PROPS
...d model props for download as unitypackage, obj, fbx, and tga on turbosquid: 3d models for games, architecture, videos. (1627660)
turbosquid
$5
props
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
PROP
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
kids props
...kids props
3ddd
декоративный набор
kids props
3d_ocean
$8
Street props
...l barrier prop roads street street prop
street props game models barrel barrier roads aircos jerrycan models fbx obj and max file
turbosquid
$39
Apocalyptic Props
...uid
royalty free 3d model apocalyptic props for download as on turbosquid: 3d models for games, architecture, videos. (1380028)
turbosquid
$1
Bunker props
...rbosquid
royalty free 3d model bunker props for download as on turbosquid: 3d models for games, architecture, videos. (1196014)