ProffieBoard Lightsaber Ultrasabers Chassis and TCSS 11 POGO pin pcb Holders by RcArchie

Last crawled date: 4 years ago

This is a lightsaber printed chassis to hold a Proffieboard, batteryholder, battery, 28mm speaker, and accommodates for wiring. I designed this for use with my Ultrasabers Dark Initiate V4. I suggest buying a different saber if you want to do a proffie install as this one is pretty basic.
I think my design here with a snap on cover was pretty neat, and perhaps you can take some ideas for your own design or modify my solidworks part
I also don't recommend a spring connector like these battery holders have, it works fine and its cheap, but your battery can compress the spring and pull away from the positive side of the battery and reboot.
I also have a 11pin TCSS long POGO pin file for a 1in saber here, and on my page, along with a heavy grade blade pcb cap holder.
I printed at high infill for strength.
if you want to know whether it'll fit your saber, check the PDF in the files for a dimensioned drawing
Saber:https://ultrasabers.com/product/dark-initiate-v4/
Battery Holder:https://www.banggood.com/3pcs-1-Slots-18650-Battery-Box-Rechargeable-Battery-Holder-Board-for-1x18650-Batteries-DIY-kit-Case-p-1475592.html?cur_warehouse=CN&rmmds=search
Speaker:https://darkwolfsabers.com/shop/ols/products/wolf-28mm-2w-4ohm-speaker