Thingiverse
probeClothespeg-001 by BETLOG
by Thingiverse
Last crawled date: 3 years, 1 month ago
probeClothespeg-001
A simple way to secure pinless or pinned OLED displays for connection to arduino/pi/etc
Rotate the STL's yourself
No supports required.
0.4mm nozzle with 0.4mm external perimeters specified in your slicer are always assumed with my things.
Yes, the pins and spring I have included in the DISPLAY stl are accurate and good references for designing around these objects.
The DISPLAY stl, is just for assembly reference.
Uses:
1x M3x8mm(or 10mm) and nut
1x M3x10mm and nut
1x M3x20mm and 2xwasher and 2x nuts (or a single M3 nylock) (only one nut is shown in the DISPLAY stl, but i use two to lock them on)
4x Pogo Pin - P75-E2 Spring Test Probe https://www.aliexpress.com/item/50pcs-P75-E2-Dia-1-02mm-100g-Spring-Test-Probe-Pogo-Pin-Free-Shipping-Wholesale/813753643.html
1x spring - 0.8Wire 10ODx15mm Long
1x dupont female 4socket....and wiring to suit.
NOTE:
I used a 4socket female dupont inside the "peg" which is pretty much mandatory, so it stays inside the 'peg' and contacts the tops of the pogos correctly (see below)
I then attached wires - female terminals at both ends, leading to 4 individual 1socket duponts on the other end, into which i shove individual pins cut from a row of slightly extra long pin headers (if I need to gender bend it to plug into a breadboard). https://www.aliexpress.com/item/10PCS-40Pin-1x40-Single-Row-Male-2-54-17mm-Breakable-Pin-Header-Connector-Strip/32846204552.html
So this allows you to plug the OLED either in via the dupont, or by pinching it under the pogos, and optionally use the dupot as a connection for cables too.
Always confirm the order of wires from the OLED to the output you are connecting.
I colour code with dots on top of the peg above the pins, and then after following each wire to it's other end mark it with the appropriate colour. You always have to check the OLED pinout, and then find the colour on both ends before plugging it in, but it's pretty foolproof and flexible.
Assemble the top two parts, dupont and cables together with the 2 bolts, making sure the dupont has the exposed section of metal pointing downwards, THEN insert the pogo pins, they just sit in there, then add the bottom section and tighten the nuts, then shove the spring in.
A simple way to secure pinless or pinned OLED displays for connection to arduino/pi/etc
Rotate the STL's yourself
No supports required.
0.4mm nozzle with 0.4mm external perimeters specified in your slicer are always assumed with my things.
Yes, the pins and spring I have included in the DISPLAY stl are accurate and good references for designing around these objects.
The DISPLAY stl, is just for assembly reference.
Uses:
1x M3x8mm(or 10mm) and nut
1x M3x10mm and nut
1x M3x20mm and 2xwasher and 2x nuts (or a single M3 nylock) (only one nut is shown in the DISPLAY stl, but i use two to lock them on)
4x Pogo Pin - P75-E2 Spring Test Probe https://www.aliexpress.com/item/50pcs-P75-E2-Dia-1-02mm-100g-Spring-Test-Probe-Pogo-Pin-Free-Shipping-Wholesale/813753643.html
1x spring - 0.8Wire 10ODx15mm Long
1x dupont female 4socket....and wiring to suit.
NOTE:
I used a 4socket female dupont inside the "peg" which is pretty much mandatory, so it stays inside the 'peg' and contacts the tops of the pogos correctly (see below)
I then attached wires - female terminals at both ends, leading to 4 individual 1socket duponts on the other end, into which i shove individual pins cut from a row of slightly extra long pin headers (if I need to gender bend it to plug into a breadboard). https://www.aliexpress.com/item/10PCS-40Pin-1x40-Single-Row-Male-2-54-17mm-Breakable-Pin-Header-Connector-Strip/32846204552.html
So this allows you to plug the OLED either in via the dupont, or by pinching it under the pogos, and optionally use the dupot as a connection for cables too.
Always confirm the order of wires from the OLED to the output you are connecting.
I colour code with dots on top of the peg above the pins, and then after following each wire to it's other end mark it with the appropriate colour. You always have to check the OLED pinout, and then find the colour on both ends before plugging it in, but it's pretty foolproof and flexible.
Assemble the top two parts, dupont and cables together with the 2 bolts, making sure the dupont has the exposed section of metal pointing downwards, THEN insert the pogo pins, they just sit in there, then add the bottom section and tighten the nuts, then shove the spring in.
Similar models
grabcad
free
Pogo pin P75-E2
...pogo pin p75-e2
grabcad
pogo testing pin
grabcad
free
Pogo pins
...pogo pins
grabcad
different models of test probes
p058-q1
p50-e1
p50-q1
p75-e2
p100-e2
thingiverse
free
Sonoff Basic R2 Pogo Pins Header
...r soldering.
the pogo pins used are the p75-e2
the springs are random ones salvaged probably from an old xerox printer (no specs)
grabcad
free
pogo pin P75-B1
...pogo pin p75-b1
grabcad
testing pins with spring
thingiverse
free
TYWE3S Flashing Jig no alligator clips by SrGeek
...ia 0.68mm 75g pressure spring test probe pin
advantage you can keep all the wires, the jig and the ftdi adapter as a kit together
thingiverse
free
2x3p programming connector for OpenSprinkler 3.2 by stanoba
...n header (as shown on image)
solder wires
crimp dupont pins on other end
put pin header to casing and fix with hot-glue gun
thingiverse
free
Pogo-pin programming Adaptor by dnsseguin
...ean the hole with drill #55 (55mils)
i use pogo pin p100-e2,
screew: 92010a006
insert: 94459a120
nut: 90592a075
pogo: p100-e2
thingiverse
free
128 x 32 OLED Display - Holder by ale8oneboy
...re fit around the display from the front. there is not a bottom on the holder as it's part of a larger future project. enjoy!
thingiverse
free
Right Angle Plug for MicroLimit Switch to DuPont by TokyoDave
...d to have awg 20 wire inserted to act as internal wiring and dupont pins. both upward and downward facing variants are included.
grabcad
free
Spring Loaded Probes
...cts / pogo pins from multicomp and ingun (could be found by id in filename).
some of pogo-pins already inserted into sockets/cups
Betlog
thingiverse
free
2020 mount for flyingbear P902 PSU with switch and banana sockets by BETLOG
...www.aliexpress.com/item/new-high-quality-red-light-power-rocker-switch-fused-iec-320-c14-inlet-power-socket-fuse/32720278625.html
thingiverse
free
dummy - connector JST XH-A B2B to B8B by BETLOG
...subtract these from a chunk of mesh and print with 0.4mm external perimeters you should get a perfect fit for those socket plugs.
thingiverse
free
combo 40mm Fan Shroud by BETLOG
...oo low for the standard heatbreak tube (it will hit the bed before the nozzle if you use it on the standard i3 mega's setup).
thingiverse
free
Raspberry Pi Zero Case - BETLOG version by BETLOG
...precise than needing to add 0.45 to 0.48...divided by two (0.225 to 0.24) to everything....0.4 divided by 2 is 0.2... and easier.
thingiverse
free
Drill_bits_cylindrical_case-BETLOG-002 by BETLOG
...precise than needing to add 0.45 to 0.48...divided by two (0.225 to 0.24) to everything....0.4 divided by 2 is 0.2... and easier.
thingiverse
free
Anycubic i3 Mega - Dual Z-Endstops by BETLOG
...precise than needing to add 0.45 to 0.48...divided by two (0.225 to 0.24) to everything....0.4 divided by 2 is 0.2... and easier.
thingiverse
free
dummy - DB15 3x5 connector pins type by BETLOG
...in pla and 0.4mm nozzle with 0.4mm external perimeter specified in slic3r.
2019-03-20 - update - very minor single dimension fix
thingiverse
free
dummy - DB15 3x5 connector solderCups type by BETLOG
...in pla and 0.4mm nozzle with 0.4mm external perimeter specified in slic3r.
2019-03-20 - update - very minor single dimension fix
thingiverse
free
BASE for - TUSH_-_The_Ultimate_Spool_Holder-001 by BETLOG
...
not a remix, but an accessory for the tush. i'll mark this as a remix so it's associated with it's thingiverse page.
001
3d_export
$15
Earrings i 001 3D Model
...d sterling silver engagement wedding stl cad printable 3d jewelry design ring
earrings i 001 3d model ritaflower 85628 3dexport
3d_export
$39
Console Table 001 3D Model
...ture old design decor retro household interior cabinet vray 3d model table
console table 001 3d model archicube.3d 74436 3dexport
3d_export
$5
House 001 low polygons 3D Model
...s 3d model
3dexport
house game second life city garden roof texture uv map
house 001 low polygons 3d model yapcipb 71121 3dexport
3d_ocean
$5
Wallpaper Textures 001
...er textures that help to make your own project beautiful use it for texturize walls, especially at the bedrooms! click “more i...
3d_ocean
$59
FABRIC TEXTURES PACK 001
...alistic fabric textures that help to make your own project beautiful use it for texturize cloth, characters or anything what y...
3d_ocean
$5
Brick Textures 001
...elp to make your own project beautiful use it for texturize walls, ruins, buildings or anything what you want! click ̶...
3d_ocean
$59
WOOD TEXTURES PACK 001
...istic wood textures that help to make your own project beautiful use it for texturize floor at the interiors, or make great de...
3d_ocean
$12
Flooring Texture - Vol 001
...le timber vintage vinyl wood
flooring texture file detail: 5×3=15 png file diffuse + bump + reflect map 6000×6000 px high detail
3d_export
$19
Glass Door Monoblock 001 3D Model
...e brass entry door
glass door monoblock 001 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl quartor 104438 3dexport
3d_ocean
$12
Office Collection Model 001
...y
model type maxon cinema 4d fbx & obj material vray materials cinema 4d r15 file format,include textures and vray materials…