Thingiverse
Printrite DIY - Ramps 1.4 mount case by shawdreamer
by Thingiverse
Last crawled date: 3 years, 1 month ago
Just finished swapping out my Colido/Printrite DIY 3d printer's Mainboard for a full Ramps 1.4 setup.
these designs are to allow the Ramps board to be housed in the same location as the original Printrite board and to house the connected full graphics lcd controller in a self contained case that can be left as "standalone" as I have, or screwed/bolted somewhere you might find convenient.
the ramps backplate use the two left most original screws and the upper centre clip point (using a zip tie) to mount to the original backplate while the front plate clips into place on the backplate with two holes for additional screws if you wish to fully lock the front in place (its pretty solid without tbh).
I havnt entirely extended over the original backplate as I intend to create a smaller second cover for the incoming & outgoing cables (utilizing the two remaining original screw points) that can be removed individually for better convenience and simple access to the plugs.
these designs are to allow the Ramps board to be housed in the same location as the original Printrite board and to house the connected full graphics lcd controller in a self contained case that can be left as "standalone" as I have, or screwed/bolted somewhere you might find convenient.
the ramps backplate use the two left most original screws and the upper centre clip point (using a zip tie) to mount to the original backplate while the front plate clips into place on the backplate with two holes for additional screws if you wish to fully lock the front in place (its pretty solid without tbh).
I havnt entirely extended over the original backplate as I intend to create a smaller second cover for the incoming & outgoing cables (utilizing the two remaining original screw points) that can be removed individually for better convenience and simple access to the plugs.
Similar models
thingiverse
free
Ramps case (and PrintRite mounts) by 1sPiRe
...ga + ramps 1.4 with a fan, and an optionnal setting for diy printrite to clip it on base rods.
needs 11 x m3*8mm screws and nuts.
thingiverse
free
Ramps 1.4 Mountable Case by jojofroyo
... fan, if you want to place it inside the case it must be a thin one, but originally i planned on having the fan outside the case.
thingiverse
free
PrintRite-Ramps 1.4 housing by shawdreamer
...t lcd panel part with minor alterations to help assist with lcd fitment
optional add-on: http://www.thingiverse.com/thing:1724940
thingiverse
free
Ramps 1.4 Box Enclosure Case TL Smoother Raspberry Pi Holder Fan Wanhao i3 by BastelOle
...p you can mount any 80mm fan. you only need some m3 and m4 screws for mounting the boards. for the raspberry i used some spacers.
thingiverse
free
Ramps 1.4 Case by LAMACO
...ramps 1.4 case by lamaco
thingiverse
simple case for ramps 1.4 board with fan mount
thingiverse
free
RAMPS 1.4/ LCD Mounting Case by jojofroyo
... cased to hold a ramps 1.4 board and a reprap discount full graphic display lcd screen. it is printed in several different parts.
thingiverse
free
Ramps 1.4 on Anet A8 Adapter by maxvi8
...here my original anet v1.0 board was (that is now dead) using the already existing holes in the frame.
i hope you'll like it!
thingiverse
free
printrite - ramps small lcd housing by shawdreamer
...th fans can be mounted internally as there is sufficient space inside even after the arduino and ramps board are fully installed)
thingiverse
free
Fan mount for RAMPS board and 50mm fan. by WheelbarrowTech
...nto the ramps board and stays in place without wobbling.
it requires two m3x20mm allen screws and two m3 nuts to mount the fan.
thingiverse
free
![[Ender 3] MKS Gen 1.4 Case (Rear Mount) by Ez3kiel](/t/8245089.jpg)
[Ender 3] MKS Gen 1.4 Case (Rear Mount) by Ez3kiel
...s
/!\ to match original wiring lenght , you have too switch "y"& "z" harness (endstop & motor cables)
Printrite
thingiverse
free
SUPPORT LOGITECH C270 PrintRite DIY 3D by Boo54
...support logitech c270 printrite diy 3d by boo54
thingiverse
support logitech c270 printrite diy 3d
thingiverse
free
Ramps case (and PrintRite mounts) by 1sPiRe
...ga + ramps 1.4 with a fan, and an optionnal setting for diy printrite to clip it on base rods.
needs 11 x m3*8mm screws and nuts.
thingiverse
free
printrite z-stop repair by shawdreamer
...printrite z-stop repair by shawdreamer
thingiverse
simple glue on z-stop repair for stated printer
thingiverse
free
printrite all-in-one E3d cooler by shawdreamer
...ated/alternative version:-http://www.thingiverse.com/thing:1713233
designed for use with http://www.thingiverse.com/thing:1684165
thingiverse
free
Topholder for Filament (PrintRite) by LordLeXaT
...printer -> created a fix for original spool holder.
part is placable on top of the printer and the spoolholder can clipped in.
thingiverse
free
E3D V6 bracket for PrintRite DIY 3D Printer by Tomi752
...ket for printrite diy 3d printer
rev 2 is ready, because with the extruder in the middle is not possible to print the full table.
thingiverse
free
DIY PrintRite Cable Chain Setup by 1sPiRe
...o be fixed on this.
to make this you will need 4 or 7 5mm steel balls, oil, 2 m3*8 screws (hex socket wished), and a few zip tie.
thingiverse
free
Extruder Block (DIY PrintRite - Replicator) by 1sPiRe
...nt volume)
-fan duct with led slot
-adjustable belt tensioner
-bowden or direct drive mount
-compatible with my cable chain setup
thingiverse
free
Printrite extruder Cooler 30mm by onmeow
...oler duct to fit the original 30mm fan.
the other parts of shawdreamers project is here:https://www.thingiverse.com/thing:1755550
thingiverse
free
DIY PrintRite X-axis Belt Clearance setup by 1sPiRe
...tup.
depending on what kind of bearing you have, i create a customizer for the idlers.
can be combine with this motor's mount
Shawdreamer
thingiverse
free
printbed standoff feet by shawdreamer
...printbed standoff feet by shawdreamer
thingiverse
standoffs
thingiverse
free
spool holder (horizontal) by shawdreamer
...spool holder (horizontal) by shawdreamer
thingiverse
spool holder
thingiverse
free
6x3 bullnose prop by shawdreamer
...6x3 bullnose prop by shawdreamer
thingiverse
material - pla
thingiverse
free
standalone heatbed feet by shawdreamer
...standalone heatbed feet by shawdreamer
thingiverse
feet for mk2a/b heatbed
thingiverse
free
Yamato-Class Benchy by shawdreamer
...yamato-class benchy by shawdreamer
thingiverse
benchy got a buff-up
thingiverse
free
U-boat Benchy by shawdreamer
...u-boat benchy by shawdreamer
thingiverse
last in the series of benchy spin-offs.
thingiverse
free
H-copter Canopy by shawdreamer
...h-copter canopy by shawdreamer
thingiverse
lightweight protective canopy for h-copter design
thingiverse
free
Nimitz-class Benchy by shawdreamer
...nimitz-class benchy by shawdreamer
thingiverse
whats better than a battleship benchy?
a aircraft carrier benchy!!
thingiverse
free
thermostatic controller board enclosure (large) by shawdreamer
...thermostatic controller board enclosure (large) by shawdreamer
thingiverse
enclosure
thingiverse
free
printrite z-stop repair by shawdreamer
...printrite z-stop repair by shawdreamer
thingiverse
simple glue on z-stop repair for stated printer
Ramps
turbosquid
$3
Kicker Ramp - Skate Ramp
...ramp - skate ramp for download as 3ds, obj, c4d, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1153575)
turbosquid
$2
Ramp
...squid
royalty free 3d model ramp for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1494204)
turbosquid
$5
ramp
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Ramp 3D Model
...ramp 3d model
3dexport
ramp jump carjump carramp car
ramp 3d model ryisnelly100 83186 3dexport
turbosquid
$10
Ramp and Barrels
...d
royalty free 3d model ramp and barrels for download as fbx on turbosquid: 3d models for games, architecture, videos. (1263040)
turbosquid
$19
Skate Ramp
...ty free 3d model skate ramp for download as dxf, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1187602)
turbosquid
$19
Skate Ramp
...ee 3d model skate ramp for download as dxf, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1187673)
turbosquid
$80
Hydralic Ramps
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$45
ramp door_center
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$40
Ramp.3DS
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Diy
3d_export
free
DIY 3D Printer
...diy 3d printer
3dexport
diy 3d printer model
turbosquid
$10
Diy tiered
...l diy tiered for download as max, max, max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1603709)
turbosquid
$3
Diy Desk to Bench
...odel diy desk to bench for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1506589)
turbosquid
$2
DIY Moon Light
...model diy moon light for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1501170)
3d_export
$8
DIY CNC Router 3D Model
...diy cnc router 3d model
3dexport
cnc; router; diy; homemade
diy cnc router 3d model maikeru86 58463 3dexport
turbosquid
$5
Diy Kitchen Cabinets
...itchen cabinets for download as 3ds, obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1197373)
3d_export
free
Download free Diying Plant 3D Model
...download free diying plant 3d model
3dexport
diying plant blender
diying plant 3d model visitorsama 98607 3dexport
3ddd
$1
DIY coffee table + decor
... рамка для фото
кофейный столик diy 400х350х600(h) мм. моделился по фото. внимание: материалы - corona.
turbosquid
$3
Diy Wire Lamp Shade
...free 3d model diy wire lamp shade for download as 3ds and fbx on turbosquid: 3d models for games, architecture, videos. (1347605)
cg_studio
$12
DIY MONGOLIAN LAMB STOOLS3d model
... hair soft pile white
.max - diy mongolian lamb stools 3d model, royalty free license available, instant download after purchase.
Case
3d_export
$1
case
...case
3dexport
case
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)
4
turbosquid
$9
Office Chair 4-4
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
doors- 4
...doors- 4
3dexport
doors 4
3d_export
$5
hinge 4
...hinge 4
3dexport
hinge 4
3ddd
$1
Штора №4
...штора №4
3ddd
штора №4
3d_export
free
playstation 4
...playstation 4
3dexport
playstation 4
turbosquid
$1
re 4-4 electric locomotive
... free 3d model re 4 4 electric locomotive for download as obj on turbosquid: 3d models for games, architecture, videos. (1707845)
3ddd
$1
nexus 4
...nexus 4
3ddd
lg , телефон
nexus 4
3ddd
$1
4 Poufs
...4 poufs
3ddd
пуф
4 soft poufs
turbosquid
$12
Calligraphic Digit 4 Number 4
...hic digit 4 number 4 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389332)
3ddd
$1
Dauphin 4+
...dauphin 4+
3ddd
кресло
dauphin 4+ конференц кресло
1
turbosquid
$69
armchairs(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
ring 1+1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
RING 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Table 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
house 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
Formula 1(1)
...lty free 3d model formula 1 for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1567088)
design_connected
$11
No 1
...no 1
designconnected
sibast no 1 computer generated 3d model. designed by sibast, helge.
turbosquid
$2
desert house(1)(1)
...3d model desert house(1)(1) for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1055095)