Thingiverse
Printrbot Play Spool Coaster Tray by k4en
by Thingiverse
Last crawled date: 4 years, 8 months ago
A tray that mounts on top of the Printrbot Play for the Spool Coaster sold by Printrbot.
This is an update that provides clearance for the extruder when printed parts require high z-axis printing.
The tray was printed with support both to the bed and part (for the slot). I used a hacksaw blade to clear the slot of support. The stop serves to keep the tray from sliding forward after the installation.
I tapped the holes in the stop for 3mm screws and drilled out the tray for 3mm clearance. Two nylon screws secure the stop to the tray.
This is an update that provides clearance for the extruder when printed parts require high z-axis printing.
The tray was printed with support both to the bed and part (for the slot). I used a hacksaw blade to clear the slot of support. The stop serves to keep the tray from sliding forward after the installation.
I tapped the holes in the stop for 3mm screws and drilled out the tray for 3mm clearance. Two nylon screws secure the stop to the tray.