Thingiverse
Print area LED mount for Wanhao Duplicator i3 PLUS by robomaniac
by Thingiverse
Last crawled date: 4 years, 7 months ago
this is remix from Airmaxx23 LED bracket for print area.http://www.thingiverse.com/thing:1498532
If you have an i3 PLUS, you will need to print this bracket because of new components on the PLUS that makes Airmaxx23 bracket not easy to install.
Please note, the LED is connected to 24V!! I have two 12V led in SERIES.
12V + 12V = 24V
The LED is very bright and reflects off the glass, I might add a sheet of frosted plastic over the LED to soften up the reflection.
If you have an i3 PLUS, you will need to print this bracket because of new components on the PLUS that makes Airmaxx23 bracket not easy to install.
Please note, the LED is connected to 24V!! I have two 12V led in SERIES.
12V + 12V = 24V
The LED is very bright and reflects off the glass, I might add a sheet of frosted plastic over the LED to soften up the reflection.