Thingiverse
Print 3D Channel Maker Coin by print3dchannel
by Thingiverse
Last crawled date: 4 years, 7 months ago
The Print 3D Channel presents our very own Maker Coin. Designed and modeled in Cinema 4D and then printed using multiple colors of MatterHackers PRO PLA on the gCreate gMax 1.5XT+ using a single extruder and the change filament command.
Printer: gCreate gMax 1.5XT+
Filament: MatterHackers PRO PLA 1.75mm In Multiple Colors
Temps: 200c
Layer Height: .16mm
Perimeters: 3
Top/Bottom Layers: 5/3
Infill: 17%
Support: None
Scale: 100%
Print Time: 1hrs 48min
Link to Print 3D Channel episode featuring Maker Coin Model and Print:
https://www.youtube.com/watch?v=HlW7A47GkPY
Printer: gCreate gMax 1.5XT+
Filament: MatterHackers PRO PLA 1.75mm In Multiple Colors
Temps: 200c
Layer Height: .16mm
Perimeters: 3
Top/Bottom Layers: 5/3
Infill: 17%
Support: None
Scale: 100%
Print Time: 1hrs 48min
Link to Print 3D Channel episode featuring Maker Coin Model and Print:
https://www.youtube.com/watch?v=HlW7A47GkPY