Thingiverse
Power Hacksaw by Bob68
by Thingiverse
Last crawled date: 3 years ago
This saw uses SCS8UU bearings and 8mm steel rods and a 25mm 12v 100rpm geared motor which i already had that's why i made this version. The base is 295x200x10mm (MDF) and am in the process of printing the other parts. This will take at least 50mm square items, the item shown in the vice is 4545 x 250mm.
Other parts needed are 2 x 8mm (340mm) Steel Rods, 2 x 6mm (200mm) threaded rod), 3 x SCS8UU bearings, 1 rocker switch (19.5 x 13mm Hole), 1 Roller switch (KW11 3Z), 1 Hex motor coupler (4mm shaft), 2 x 100mm x 72 mm hinges, 1 DC 2.1mm panel mount socket. 2 x 6mm couplers or wingnuts, 1 x 4mm x 20mm threaded spacer or wingnut.
2 x 3mm Bolts (8mm Button Flanged) [Motor]
8 x 4mm Nuts and 20mm long bolts to mount the motor and base.
16 x 4mm Nuts and 16mm long Countersunk bolts for the hinges.
2x 4mm Nyloc Nuts with 25mm long bolts to fix the steel rods + 2 washers.
For the Hacksaw blade, 1 x 4mm x 20mm bolt, 1 x 4mm x 12mm bolt, 1 x 4 x 50mm bolt,2 x nyloc nuts and 1 x 4mm washer.
To connect the motor to the blade assembly.
1x 4mm x 20mm bolt, 1 x 4mm nyloc nut, 2 x 4mm x 25mm penny washer.
10 x 4mm washers used as a bearing (see last picture)
1 x 6mm x 50mm bolt, 1 x 6mm washer and 1 nyloc flange nut.
To connect the three SCS bearings and the green board.
12 x 4mm x 16mm bolts
3 x 4mm x 25mm bolts
2 x 4mm x 35mm bolts
5 x 4mm half nuts
3 x 4mm washers.
The Vice mounted on the board takes 3 x 4mm x 35mm bolts, 3 x 4mm washers and 3 x 4mm nyloc nuts. 4 x 6mm half nuts to fix the stud.
If the other vice is used. 3 x 4mm x 35mm bolts, 3 x 4mm washers and 3 x 4mm nyloc nuts. 6 x 6mm half nuts for the stud.
(Changes)
Enlarged hole on "motor mount". The threads of the DC connector would not fit (see picture)
The 3mm x 6mm bolts for the motor interfered with the shaft coupler. These need to be changed to 3mm x 8mm (Max) Button Flange bolts. (See picture)
(Changes 2)
Added packing pieces so that the blade is pushing level or down on the cutting stroke. Saw base V2 has new holes for this. Made a motor mount and clamp for a 37mm geared motor. Changed the drive piece to one with multiple holes, more power and a slower cut or a faster cut with less power.
(Changes 3)
Remade "37mm motor mount" and "37mm motor clamp" (V2) and removed packing pieces.
This was to reduce some of the movement within the assembly. Use original saw base template.
Made a motor base and switch mount for a 555 geared motor. Use original saw base template.
Made a printable hinge for the saw. This requires a 4mm steel rod 210mm long.
The saw looks like some weight is needed to assist the cut. This can be bolted on the "bearing mount" using longer bolts.
Other parts needed are 2 x 8mm (340mm) Steel Rods, 2 x 6mm (200mm) threaded rod), 3 x SCS8UU bearings, 1 rocker switch (19.5 x 13mm Hole), 1 Roller switch (KW11 3Z), 1 Hex motor coupler (4mm shaft), 2 x 100mm x 72 mm hinges, 1 DC 2.1mm panel mount socket. 2 x 6mm couplers or wingnuts, 1 x 4mm x 20mm threaded spacer or wingnut.
2 x 3mm Bolts (8mm Button Flanged) [Motor]
8 x 4mm Nuts and 20mm long bolts to mount the motor and base.
16 x 4mm Nuts and 16mm long Countersunk bolts for the hinges.
2x 4mm Nyloc Nuts with 25mm long bolts to fix the steel rods + 2 washers.
For the Hacksaw blade, 1 x 4mm x 20mm bolt, 1 x 4mm x 12mm bolt, 1 x 4 x 50mm bolt,2 x nyloc nuts and 1 x 4mm washer.
To connect the motor to the blade assembly.
1x 4mm x 20mm bolt, 1 x 4mm nyloc nut, 2 x 4mm x 25mm penny washer.
10 x 4mm washers used as a bearing (see last picture)
1 x 6mm x 50mm bolt, 1 x 6mm washer and 1 nyloc flange nut.
To connect the three SCS bearings and the green board.
12 x 4mm x 16mm bolts
3 x 4mm x 25mm bolts
2 x 4mm x 35mm bolts
5 x 4mm half nuts
3 x 4mm washers.
The Vice mounted on the board takes 3 x 4mm x 35mm bolts, 3 x 4mm washers and 3 x 4mm nyloc nuts. 4 x 6mm half nuts to fix the stud.
If the other vice is used. 3 x 4mm x 35mm bolts, 3 x 4mm washers and 3 x 4mm nyloc nuts. 6 x 6mm half nuts for the stud.
(Changes)
Enlarged hole on "motor mount". The threads of the DC connector would not fit (see picture)
The 3mm x 6mm bolts for the motor interfered with the shaft coupler. These need to be changed to 3mm x 8mm (Max) Button Flange bolts. (See picture)
(Changes 2)
Added packing pieces so that the blade is pushing level or down on the cutting stroke. Saw base V2 has new holes for this. Made a motor mount and clamp for a 37mm geared motor. Changed the drive piece to one with multiple holes, more power and a slower cut or a faster cut with less power.
(Changes 3)
Remade "37mm motor mount" and "37mm motor clamp" (V2) and removed packing pieces.
This was to reduce some of the movement within the assembly. Use original saw base template.
Made a motor base and switch mount for a 555 geared motor. Use original saw base template.
Made a printable hinge for the saw. This requires a 4mm steel rod 210mm long.
The saw looks like some weight is needed to assist the cut. This can be bolted on the "bearing mount" using longer bolts.
Similar models
thingiverse
free
Clamps by Bob68
... is about 32mm.
the other clamp used 8mm x 450mm studs, 4 x 8mm half nuts. with 8mm couplers.
the depth of the jaw is about 35mm.
thingiverse
free
Hacksaw Handle by Bob68
...here:-http://www.thingiverse.com/thing:2004093
they are:-
2 x bar tensioners
blade support
blade tensioner
blade tensioner 1'
thingiverse
free
Prusa i3 MK2 Remix (2020 profile) by brydon1593
...h)
main board
rumba or ramps or anything you like
frame
2020 all profiles
2 x 600mm profile
5 x 500mm profile
8 x corner brackets
thingiverse
free
GrubScrew Z-Coupler 5x8mm by Gringoling
... :)
25mm high, 20mm thick
for 5mm motor and 8mm leadscrew
each coupler requires 5x 6mm m3/m4? (4mm thick) grubscrews
enjoy! :)
thingiverse
free
Magball Carriages for Kossel printer with 2020 extrusions by JohnOCFII
...ension bolt 35mm
35mm m3 bolt
nyloc nut
the openscad file is included along with the stl files in case you wish to make changes.
thingiverse
free
Kossel mini 1.75mm Extruder Kai by JamesRX
...5mm bolt x 3
m3 35mm (or 30mm) bolt x 1
m3 nut x 1
m3 washer x 6
m4 10mm spring x 1
m5 20mm bolt x 1
m5 nut x 1
625zz bearing x 1
thingiverse
free
8mm Rod - Mounting Block by JMcAz7
...mcaz7
thingiverse
8mm rod mounting block. uses a 4mm cap head screw and nut for the pinch, and 6mm cap head screws for the base.
thingiverse
free
idbox! Center Arm by idbox325
...x 1 (unsprung mounting portion)
m3 bolt & nut 20-25mm x 1
rale:
m6 hexagon bolt & laurette nut
m3 bolt & nut 20mm x 2
grabcad
free
Filament Bearing Roller
...t base 1
bolt base 2 (carriage bolt insert)
20mm washer
5mm washer
wingnut (epoxy 5/16 nut inside)
see image for assembly order.
thingiverse
free
Hinges for 1.6cm MDF enclosure. by NorthernLayers
... x 4mm woodscrews.
2 x 6mm x 90mm bolts
2 x 6mm nyloc nuts
released through my company northern layers: http://northernlayers.com
Bob68
thingiverse
free
Solar Cell Bracket by Bob68
...l bracket by bob68
thingiverse
this is for the 3w and 1.5w solar cells (145mm x 145mm and 115mm x 85mm).
fixing bolts m4 x 50mm.
thingiverse
free
Flag Coasters by Bob68
...on my printer so the rest were printed at 125%. the different colours were extruded to different heights to make printing easier.
thingiverse
free
Large Wheels by Bob68
...of the tyre is 121mm x 60mm. the other tyre that is included is 135mm x 35mm which is the only version that has been made so far.
thingiverse
free
Screwdriver Bit Holders by Bob68
... bits handy. most of the time using a screwdriver handle is not necessary for adjustments.
22-06-18. added the four larger sizes.
thingiverse
free
Rocker Switch Holder by Bob68
...ed/brown parts in the diagram are printing support to be cut away.
printed upside down then will not need any additional support.
thingiverse
free
Component Drawers with Label Slot by Bob68
...sting drawers uploaded here:-http://www.thingiverse.com/thing:1443211
also for use with:-http://www.thingiverse.com/thing:1442036
thingiverse
free
Bed Levelling Wedge by Bob68
...ght is adjustable by printing items with a raft. nuts and bolts used were 3mm and 50mm in length, although 40mm length should do.
thingiverse
free
30mm/40mm Fan Guard/Grilles by Bob68
...hingiverse
fan grilles for 30 and 40mm fans. the 30mm grille is 1mm thick with a 1.5mm base and the 40mm is 1.5mm thick overall.
thingiverse
free
Component Drawers by Bob68
...ds internally on the slots, which was easy to clean up.
the other parts shown are here:- http://www.thingiverse.com/thing:1442036
thingiverse
free
Socket Finger Guard by Bob68
...t around the bolts on the perspex sheet. changed slightly from the actual item shown because i forgot to make space for the nuts.
Hacksaw
turbosquid
$5
Hacksaw
...lty free 3d model hacksaw for download as blend, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1582182)
turbosquid
$1
hacksaw
...ree 3d model hacksaw for download as 3ds, obj, md3, and blend on turbosquid: 3d models for games, architecture, videos. (1206406)
3d_export
$5
hacksaw
...aw 3d model. low poly and game ready. with blender files and textures!<br>verts: 234<br>faces: 179<br>tris: 353
3d_export
free
another hacksaw
...another hacksaw
3dexport
. . . 3d model of a hacksaw. 3d model files: - 3ds max 2017 (scanline) - obj (low poly) . . .
3d_export
$20
Hacksaws 3D Model
...hacksaws 3d model
3dexport
hacksaw hack saw tool workshop garage metalwork woodwork
hacksaws 3d model pixelblock 29486 3dexport
3d_export
free
hacksaw 1
...hacksaw 1
3dexport
subscribe to my youtube channel:
3d_export
$40
Hacksaw 3D Model
...lade handheld teeth carpentry carpenter photoreal detailed textures materials high poly
hacksaw 3d model plutonius 34291 3dexport
turbosquid
$1
Pedal Powered Hacksaw
...ee 3d model pedal powered hacksaw for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1460543)
turbosquid
$12
Old hacksaw for metal
...model old hacksaw for metal for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1678456)
turbosquid
$10
100 hacksaw hi
...3d model 100 hacksaw hi for download as ma, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1258985)
Power
turbosquid
$100
power
...ower
turbosquid
royalty free 3d model power for download as on turbosquid: 3d models for games, architecture, videos. (1421990)
3d_export
$5
Power
...power
3dexport
3d_export
$5
power outlets
...power outlets
3dexport
power outlets
3ddd
$1
lion power
...lion power
3ddd
лев , статуя
lion power gold sculpture
3ddd
$1
Sea Power
...
компас , море , часы
часы с компасом sea power
3ddd
free
Meridiani / Power
...power
3ddd
meridiani , круглый
стол power производитель meridiani, диаметр 120,высота 67
3d_export
$5
Power Surge
...power surge
3dexport
the power surge is a all mesh carnival ride to lower in game part count and lag
turbosquid
$8
Airport Ground Power Unit (AXA Power )
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
Power Houser
...rbosquid
royalty free 3d model power houser for download as on turbosquid: 3d models for games, architecture, videos. (1333800)
3d_export
$5
power outlet
...power outlet
3dexport
power outlet<br>format file maya 2018, 3d max 2017, obj, fbx