Thingiverse
Powell Split frames for stingless bees
by Thingiverse
Last crawled date: 6 years ago
This can be used for the species of stingless bee with delicate brood and small nest volume. It is clipped together and then placed inside your stingless bee hive.
Please note the internal dimensions of the hive box used are. 190mm long 110mm wide and 100mm deep. If you make your hive exactly to these measurements you will have a bee space around your split frame. This will enable you to remove your halves from your hive.
Notes to printer.
Recommended that the walls be printed from ABS or PLA and the brood wall be printed from Nylon or something flexible . You will need a very finely tuned printer for this job do not attempt to print this on a printer if your still tuning your printer. You will need to print two of each plan to have your set for one hive. ie 2x wall 2x brood
For a look at what they do follow this youtube link.https://youtu.be/bBCPAq9y0Cs
Please note the internal dimensions of the hive box used are. 190mm long 110mm wide and 100mm deep. If you make your hive exactly to these measurements you will have a bee space around your split frame. This will enable you to remove your halves from your hive.
Notes to printer.
Recommended that the walls be printed from ABS or PLA and the brood wall be printed from Nylon or something flexible . You will need a very finely tuned printer for this job do not attempt to print this on a printer if your still tuning your printer. You will need to print two of each plan to have your set for one hive. ie 2x wall 2x brood
For a look at what they do follow this youtube link.https://youtu.be/bBCPAq9y0Cs