Thingiverse
Pot Mold by yura3d
by Thingiverse
Last crawled date: 4 years, 5 months ago
Printed in PLA without supports. The central insert has 2 options hollow and fully closed.
I have used 3 perimeters and 5% infill
The next step is to make an actual pot. Stay tuned.
Inspired by:
Alexandre Chappel https://www.youtube.com/watch?v=q8P_RM9veSE
Dimentions:
This is the large mold for the pot. The resulting pot is 250mm x 110mm
What you need to print?
3 exact same mold parts
1 insert
To test
If somebody wants to try this as a test print, please let me know the results. I'm planning to do mine during Christmas.
I have used 3 perimeters and 5% infill
The next step is to make an actual pot. Stay tuned.
Inspired by:
Alexandre Chappel https://www.youtube.com/watch?v=q8P_RM9veSE
Dimentions:
This is the large mold for the pot. The resulting pot is 250mm x 110mm
What you need to print?
3 exact same mold parts
1 insert
To test
If somebody wants to try this as a test print, please let me know the results. I'm planning to do mine during Christmas.