Thingiverse
Post Insulator outrigger by KiwiTinkerer
by Thingiverse
Last crawled date: 5 years ago
POST INSULATOR OUTRIGGER V2 now availablehttps://www.thingiverse.com/thing:4784893
Needed outriggers for my horse. They are expensive at farming stores so I threw this together for a fraction of the price worth of filament. did a couple test prints with tweaks to improve model. I'm printing 66 of these suckers :)
Designed for timber Tek screws but should work with nails.
3 top and bottom solid layers along with 3 shells should be strong enough for most applications.
Added insulator with 90 degree bend with 2 mm gap.
I've changed the infill percentage to 15 as 30 is still kind of overkill.
Needed outriggers for my horse. They are expensive at farming stores so I threw this together for a fraction of the price worth of filament. did a couple test prints with tweaks to improve model. I'm printing 66 of these suckers :)
Designed for timber Tek screws but should work with nails.
3 top and bottom solid layers along with 3 shells should be strong enough for most applications.
Added insulator with 90 degree bend with 2 mm gap.
I've changed the infill percentage to 15 as 30 is still kind of overkill.