Thingiverse
![Portable Droplet Barrier Supports by DaveMakesStuff](/previews/8125754.jpg)
Portable Droplet Barrier Supports by DaveMakesStuff
by Thingiverse
Last crawled date: 3 years, 5 months ago
These supports are designed for portable droplet barriers such as those used in classrooms. You’ll need to print two “Plexiglass Holders” and four “Braces,” either the 100mm or 150mm version depending on the height of your barrier.
The “Plexiglass Holder” fits 1/8” plexiglass or acrylic. Depending on the exact dimensions of your barrier material and print settings, they will likely fit tightly enough to remain in place on their own. Add some glue if you want them to remain in place permanently.
If you would like them to be removable but want to ensure that they don’t slip off unexpectedly, loop some 5mm or ¼” shock cord through the holes to secure them to the material. Use separate loops for barriers with tray holes (as pictured above). For barriers without tray slots, connect two “plexiglass holders” with two pieces of shock cord so that the cord stretches across the full bottom width of the barrier when the holders are in place. Print the “Plexiglass Holders” in the upright position, avoid using brim if you can.
The “braces” slide into the slots in both sides of the two “Plexiglass Holders.” A general guideline is to have your base of support measure 1/3 of the total height of the barrier. Two of the “Brace (100mm)” braces will give a total base of support of approximately 20cm, suitable for supporting barriers approximately 60cm. The “Brace (150mm)” braces will support up to 90cm.
I recommend printing the braces on their side as they are provided. Printing them in this orientation will result in a stronger print than printing upright and they will also be easier to slide in and out. The downside is that you’ll need to use some brim to ensure that the thin edge of the insert piece is held in place for the first part of the print. You’ll also have to do some post-print filing to remove all the brim so that it slides smoothly into the groove on the “Plexiglass Holder”.
I recommend adding some non-slip adhesive bumpers to the bottom of the braces.
The “Plexiglass Holder” fits 1/8” plexiglass or acrylic. Depending on the exact dimensions of your barrier material and print settings, they will likely fit tightly enough to remain in place on their own. Add some glue if you want them to remain in place permanently.
If you would like them to be removable but want to ensure that they don’t slip off unexpectedly, loop some 5mm or ¼” shock cord through the holes to secure them to the material. Use separate loops for barriers with tray holes (as pictured above). For barriers without tray slots, connect two “plexiglass holders” with two pieces of shock cord so that the cord stretches across the full bottom width of the barrier when the holders are in place. Print the “Plexiglass Holders” in the upright position, avoid using brim if you can.
The “braces” slide into the slots in both sides of the two “Plexiglass Holders.” A general guideline is to have your base of support measure 1/3 of the total height of the barrier. Two of the “Brace (100mm)” braces will give a total base of support of approximately 20cm, suitable for supporting barriers approximately 60cm. The “Brace (150mm)” braces will support up to 90cm.
I recommend printing the braces on their side as they are provided. Printing them in this orientation will result in a stronger print than printing upright and they will also be easier to slide in and out. The downside is that you’ll need to use some brim to ensure that the thin edge of the insert piece is held in place for the first part of the print. You’ll also have to do some post-print filing to remove all the brim so that it slides smoothly into the groove on the “Plexiglass Holder”.
I recommend adding some non-slip adhesive bumpers to the bottom of the braces.
Similar models
thingiverse
free
![Tamiya Hornet, shock tower brace](/t/4909929.jpg)
Tamiya Hornet, shock tower brace
...er brace
thingiverse
this brace fits on top of the two rear shock towers to add some rigidity... held in place by two zip-ties.
thingiverse
free
![Manti CLs by wleaftx](/t/8309561.jpg)
Manti CLs by wleaftx
...ted upright.
i have tried printing upright without supports with good results, as long as i have enough brim to keep it upright.
thingiverse
free
![Project box, Slide together. by Peterthinks](/t/8793143.jpg)
Project box, Slide together. by Peterthinks
...he ends. pop holes in it as needed. i might make some custom sizes later with rails that hold boards if there is enough interest.
thingiverse
free
![Zebra DelGuard Pencase by Tig3rch3n](/t/8589330.jpg)
Zebra DelGuard Pencase by Tig3rch3n
...ht, with a 5mm brim
print time 1:50h
the pens will just snap into place and will slip-out with a bit of pressure against the clip
thingiverse
free
![bit holder by mightygrom](/t/8919936.jpg)
bit holder by mightygrom
...m x 100mm x 15mm and holds 126 bits.
bits v2 is scaled up just slightly because it was a little tight printed on my machine...
thingiverse
free
![18mm Slide Holder by ATrojan](/t/8258148.jpg)
18mm Slide Holder by ATrojan
... slide upright while packing.
fit's nicely on a tray and can easily support the edge of the grinder on the lip of the block.
thingiverse
free
![Ball Bungee by Toolix](/t/8914688.jpg)
Ball Bungee by Toolix
...ort is not needed.
use a 4mm bungee cord, tie the ends with a knot and pull the loop into the hole of the ball.
diameter = 25mm
thingiverse
free
![Prusa Multi Material Spool Holder with cross braces by Aero3D](/t/8560934.jpg)
Prusa Multi Material Spool Holder with cross braces by Aero3D
...ace (print x2 of them plus x4 of the uprights) and added holes in the uprights to accept a 12mmxm3 bolt and nut to add stability.
thingiverse
free
![OralB Toothbrush Tray by Lowride](/t/9690661.jpg)
OralB Toothbrush Tray by Lowride
...ingiverse
just a simple holder for two oralb electric toothbrushes. it should help keeping them upright when not on the charger.
thingiverse
free
![Dual front shock hoops for battery tray, steering, and shock mount mod (Twin Hammers compatible) by SILVERADORED](/t/8168504.jpg)
Dual front shock hoops for battery tray, steering, and shock mount mod (Twin Hammers compatible) by SILVERADORED
... the rear shock.
battery tray, steering, and upright shock files these are designed for:https://www.thingiverse.com/thing:2839924
Davemakesstuff
thingiverse
free
![Pointer by DaveMakesStuff](/t/8124595.jpg)
Pointer by DaveMakesStuff
... pointing at things.
sections screw apart for compact storage and transport. rods are 10cm long, print whatever length you need.
thingiverse
free
![Gyroid Sculpture with Oval Profile by DaveMakesStuff](/t/8193724.jpg)
Gyroid Sculpture with Oval Profile by DaveMakesStuff
...roid/. it can be purchased at: https://www.shapeways.com/designer/davemakesstuff
see here for video: https://youtu.be/wcjtddytqi0
thingiverse
free
![Corona Pumpkin by DaveMakesStuff](/t/8147386.jpg)
Corona Pumpkin by DaveMakesStuff
...#39;ll probably end up with a headache and fever.
here's a better one for printing: https://www.thingiverse.com/thing:4620382
thingiverse
free
![Voronoi Rhombic Dodecahedron Sphere by DaveMakesStuff](/t/5105267.jpg)
Voronoi Rhombic Dodecahedron Sphere by DaveMakesStuff
... in this sphere are centered on the faces of a rhombic dodecahedron. connecting multiple spheres hole-to-hole will tile 3d space.
thingiverse
free
![Hextuple Klein Bottle by DaveMakesStuff](/t/8164586.jpg)
Hextuple Klein Bottle by DaveMakesStuff
...hat it takes a long time to print, the good news is that it prints without supports.
see video here: https://youtu.be/zcb6e3u87qm
thingiverse
free
![Golden Rhombohedra by DaveMakesStuff](/t/8189617.jpg)
Golden Rhombohedra by DaveMakesStuff
...
see here for christmas ornament versions: https://www.thingiverse.com/thing:4577036
see video here: https://youtu.be/odaqybfys84
thingiverse
free
![Three Voronoi Gyroid Spheres by DaveMakesStuff](/t/8004766.jpg)
Three Voronoi Gyroid Spheres by DaveMakesStuff
...rnal structures and edge boundary. files are provided with and without supports.
see here for video: https://youtu.be/lunhqfodetm
thingiverse
free
![Golden Rhombohedra Ornaments by DaveMakesStuff](/t/8189618.jpg)
Golden Rhombohedra Ornaments by DaveMakesStuff
...s are separate shells that can be removed by your mesh editing software if you wish.
see video here: https://youtu.be/odaqybfys84
thingiverse
free
![Coronavirus Tree Topper by DaveMakesStuff](/t/8157113.jpg)
Coronavirus Tree Topper by DaveMakesStuff
...ole object is also provided for you to print as you wish.
see here for a plain ornament:https://www.thingiverse.com/thing:4321410
thingiverse
free
![Boy's Bowl by DaveMakesStuff](/t/8165826.jpg)
Boy's Bowl by DaveMakesStuff
...pasta :)
boy's surface on wikipedia:https://en.wikipedia.org/wiki/boy%27s_surface
see video here:https://youtu.be/x6b0zxcwoye
Droplet
design_connected
$13
![Droplet](/t/4568970.jpg)
Droplet
...droplet
designconnected
artemide droplet computer generated 3d model. designed by lovegrove, ross.
3ddd
$1
![Willowlamp - Droplet](/t/847976.jpg)
Willowlamp - Droplet
...- droplet
3ddd
willowlamp , droplet
http://www.willowlamp.com/family.php?id=18
turbosquid
free
![Apple with droplets](/t/13243595.jpg)
Apple with droplets
...model apple with droplets for download as blend, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1562008)
3d_export
$25
![water droplets](/t/11923272.jpg)
water droplets
...water droplets
3dexport
simple rendering of the scene file
3ddd
$1
![Artemide / droplet](/t/1089944.jpg)
Artemide / droplet
...rtemide / droplet
3ddd
artemide , om
artemide / droplethttp://www.artemide.ru/
3d_export
$50
![Can with droplets 3D Model](/t/120528.jpg)
Can with droplets 3D Model
...ts 3d model
3dexport
can droplets tin water drink cola soda beer aluminium chrome
can with droplets 3d model groch 81241 3dexport
turbosquid
$33
![Droplet water splash](/t/13449258.jpg)
Droplet water splash
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
![Droplet ceiling light](/t/13396109.jpg)
Droplet ceiling light
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
![Glass of water with ice and droplets](/t/13303390.jpg)
Glass of water with ice and droplets
... with ice and droplets for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1325150)
3d_ocean
$5
![Water Droplets Seamless Texture](/t/592555.jpg)
Water Droplets Seamless Texture
...ted from photographs. displacement, normal, occlusion, alpha and specular jpg maps are all included in this download! displace...
Barrier
3d_export
$5
![Barriers](/t/12844499.jpg)
Barriers
...barriers
3dexport
3d_ocean
$2
![Barrier](/t/590000.jpg)
Barrier
...barrier
3docean
barricade barrier city emergency road security stop street
files: .3ds .c4d .obj
turbosquid
free
![barrier](/t/13386215.jpg)
barrier
...barrier
turbosquid
free 3d model barrier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1147784)
turbosquid
$1
![Barrier](/t/13351146.jpg)
Barrier
...turbosquid
royalty free 3d model barrier for download as obj on turbosquid: 3d models for games, architecture, videos. (1634389)
turbosquid
free
![Barrier](/t/13292822.jpg)
Barrier
...rbosquid
free 3d model barrier for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1425350)
turbosquid
free
![Barrier](/t/13282215.jpg)
Barrier
...turbosquid
free 3d model barrier for download as fbx and dae on turbosquid: 3d models for games, architecture, videos. (1469726)
turbosquid
$15
![barrier](/t/13245457.jpg)
barrier
...
royalty free 3d model barrier for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1414596)
turbosquid
$10
![Barriers](/t/13399261.jpg)
Barriers
...id
royalty free 3d model barrier for download as fbx and obj on turbosquid: 3d models for games, architecture, videos. (1691091)
3d_export
$18
![traffic barriers](/t/11889666.jpg)
traffic barriers
...traffic barriers
3dexport
traffic barriers + 8k texture
3d_export
$5
![construction barrier](/t/11889669.jpg)
construction barrier
...construction barrier
3dexport
construction barrier + 8k texture
Portable
3d_ocean
$4
![Portable Shelves](/t/563070.jpg)
Portable Shelves
...portable shelves
3docean
drawer furniture portable shelves wheel
portable shelves with wheels
3d_export
$5
![portable generator](/t/11888264.jpg)
portable generator
...portable generator
3dexport
3d model portable generator. videogames.
3d_export
$16
![Portable Radio](/t/13109713.jpg)
Portable Radio
...portable radio
3dexport
turbosquid
$30
![Portable Generator](/t/13283940.jpg)
Portable Generator
...
royalty free 3d model portable generator for download as obj on turbosquid: 3d models for games, architecture, videos. (1579389)
turbosquid
$5
![Portable Radio](/t/13327286.jpg)
Portable Radio
...uid
royalty free 3d model portable radio for download as fbx on turbosquid: 3d models for games, architecture, videos. (1402570)
turbosquid
$3
![Portable Keyboard](/t/13293106.jpg)
Portable Keyboard
...royalty free 3d model portable keyboard for download as blend on turbosquid: 3d models for games, architecture, videos. (1281917)
turbosquid
$49
![Portable Office](/t/13505856.jpg)
Portable Office
...3d model portable office for download as max and unitypackage on turbosquid: 3d models for games, architecture, videos. (1470540)
turbosquid
$15
![PORTABLE LIGHTS](/t/13392191.jpg)
PORTABLE LIGHTS
...lty free 3d model portable lights for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1679464)
3d_ocean
$12
![Portable Sofa](/t/904826.jpg)
Portable Sofa
...r table 2. minimalis sofa 3. sofa and mini sofa (can for foot) 4. mini sofa and table tertured with v-ray, and no material needed
turbosquid
$11
![Safe portable](/t/13511831.jpg)
Safe portable
...free 3d model safe portable for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1410826)
Supports
turbosquid
$5
![Support](/t/13237447.jpg)
Support
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$8
![Support 3D Model](/t/14172.jpg)
Support 3D Model
...support 3d model
3dexport
support cantilever console
support 3d model tasal 73900 3dexport
3d_export
$5
![phone support](/t/11927436.jpg)
phone support
...phone support
3dexport
phone
turbosquid
$12
![Support bars](/t/13366580.jpg)
Support bars
...squid
royalty free 3d model support bars for download as max on turbosquid: 3d models for games, architecture, videos. (1411542)
turbosquid
$8
![support weights](/t/13366582.jpg)
support weights
...id
royalty free 3d model support weights for download as max on turbosquid: 3d models for games, architecture, videos. (1411538)
turbosquid
$2
![headphone support](/t/13241074.jpg)
headphone support
...royalty free 3d model headphone support for download as sldpr on turbosquid: 3d models for games, architecture, videos. (1357583)
turbosquid
$2
![Support for flowers](/t/13334503.jpg)
Support for flowers
...royalty free 3d model support for flowers for download as max on turbosquid: 3d models for games, architecture, videos. (1463543)
turbosquid
$14
![Flower Support](/t/13427582.jpg)
Flower Support
...alty free 3d model flower support for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1497066)
turbosquid
$5
![serum support](/t/13299655.jpg)
serum support
...yalty free 3d model serum support for download as c4d and obj on turbosquid: 3d models for games, architecture, videos. (1551267)
3d_export
$10
![spyro joystick support](/t/11921884.jpg)
spyro joystick support
...spyro joystick support
3dexport
joystick support of spyro dragon