Thingiverse
Portable DDR Pad Corner Fillers by Underscoring
by Thingiverse
Last crawled date: 4 years ago
Was making my own FSR DDR Pad based off Bandit's guide (https://youtu.be/y6wGYLE0YI4) and the corners needed filling in and i didnt want to use/cut up my remaining panels.
The thickness is based off my panels (6.3mm) and my side panels width are ~4" (101.6 mm)
(I seemingly lost this file :s) The hole in the Dev board Panel is based off Sparkfun's Small Dev boards if you sand down the notches (https://www.sparkfun.com/products/12045) and I printed it upside down, so you may want to flip it in your slicer
Attached to the pad with Velcro
The thickness is based off my panels (6.3mm) and my side panels width are ~4" (101.6 mm)
(I seemingly lost this file :s) The hole in the Dev board Panel is based off Sparkfun's Small Dev boards if you sand down the notches (https://www.sparkfun.com/products/12045) and I printed it upside down, so you may want to flip it in your slicer
Attached to the pad with Velcro