Thingiverse
Popper Licious - Lure - Fishing Lure by arovillard
by Thingiverse
Last crawled date: 3 years, 1 month ago
Popper Licious
Preferred scale: 150% with 3 walls and 3 top and bottom layers at 0.3 and 10-15% Grid infill at 45 and - 45 degrees, this has given me the best results as there will be an X through the middle of the lure and the chamber will have a much smaller bridging to do. The popper, when resting in the water, has to sit at an angle (see picture for reference) I had to play around with different hook sizes until I was able to find the right combination. One thing to keep in mind is, if you print it at 100% size, it will be very dense and not float much (even sink once the hooks are on) so consider lightening it up when printing smaller versions than 130%. If you intend to use a bb for rattling, don't forget to pause the print to add it.
The 3 holes are designed to not come out as holes but to trick the slicer into adding material in that area so the eye screw has something to bite into. I personally drill the holes with a bit half the diameter of the eye screw and then use epoxy to secure it.
Poppers are my favorite type of lures and I decided to design my own, Features include:
Chamber for steel bb (rattler)
Scalable, you can print them at different scales to match the size of fish on your lake
Gills that shoot water as you pop it.
Everything you need to finish this lure:Budget Treble HooksBetter quality hooksSplit RingsSplit Ring ToolEye Screws
Preferred scale: 150% with 3 walls and 3 top and bottom layers at 0.3 and 10-15% Grid infill at 45 and - 45 degrees, this has given me the best results as there will be an X through the middle of the lure and the chamber will have a much smaller bridging to do. The popper, when resting in the water, has to sit at an angle (see picture for reference) I had to play around with different hook sizes until I was able to find the right combination. One thing to keep in mind is, if you print it at 100% size, it will be very dense and not float much (even sink once the hooks are on) so consider lightening it up when printing smaller versions than 130%. If you intend to use a bb for rattling, don't forget to pause the print to add it.
The 3 holes are designed to not come out as holes but to trick the slicer into adding material in that area so the eye screw has something to bite into. I personally drill the holes with a bit half the diameter of the eye screw and then use epoxy to secure it.
Poppers are my favorite type of lures and I decided to design my own, Features include:
Chamber for steel bb (rattler)
Scalable, you can print them at different scales to match the size of fish on your lake
Gills that shoot water as you pop it.
Everything you need to finish this lure:Budget Treble HooksBetter quality hooksSplit RingsSplit Ring ToolEye Screws
Similar models
thingiverse
free
The Skwid lure
... (if you can), and slip on a skirt (on the lure, in case that wasn't clear).
if printed at this scale, #4 hooks will suffice.
thingiverse
free
Popper by heavynets
...er has a groove in which to glue the hook, flats to stick the eyes on and a tube through the body in which to insert rubber legs.
thingiverse
free
Spinnertail by PaoloF
...sed 6g total, 3 bb of 2g).
to complete the lure you need 3 eye screws, 3 split rigs, a swivel for the tail and of course an hook.
thingiverse
free
Rattle Popper Fishing Lure by jordanf78
... hooks mounted on the bottom, rather than one in the tail, soon.
if you catch any monsters with this lure, please share pictures!
thingiverse
free
Fishing Lure for Trout NR.2 (one piece!) by Domi1988
...le to add a 4.5mm metal bb and is slow sinking
print settings:
100% infill
big brim!
2 outer walls
0.2mm layer height
no support!
cults
free
Popper Fishing Lure
...popper fishing lure
cults
popper fishing lure
popper fishing lure
thingiverse
free
Bream Swim bait Fishing lure by 863jsarts
....it really swims like a real fish . the holes are there to put the eye hooks there i wouldn't print it smaller than 3in /78mm
cults
free
Floating Popper Bait
...an drill up the holes to fit larger eye bolts.
length: 100 mm
popper fishing style: https://www.youtube.com/watch?v=tpyzhqwzlkk
thingiverse
free
Floating Popper Bait by FransJ
...can drill up the holes to fit larger eye bolts.
length: 100 mm
popper fishing style: https://www.youtube.com/watch?v=tpyzhqwzlkk
thingiverse
free
Fishing Lures by toasty1776
...t it doesn't work louse.
please comment if you find this interesting, or have any suggestions on ways to improve these lures.
Arovillard
thingiverse
free
Autobotix nuts for drones by arovillard
...tobotix.ca, drones with balls!!
orient this part with the logo facing right and use proper supports. (100 microns and 10% infill)
thingiverse
free
Ping Pong raquet paddle by arovillard
...o i designed a replacement center and handle parts. i tested it without the pads and it also works really well.
accessories: link
thingiverse
free
688 Fidget Spinner - high end bearing by arovillard
...== easier to spin.
bearings
high end quality bearings click here
good quality bearings click herehttps://youtu.be/sg_puv8qxxe
thingiverse
free
DMR-Oval-Canopy by arovillard
...
for best results i printed the oval parts in tpu at 120% extrusion multiplier, 3 walls all around and 30% infill with supports.
thingiverse
free
Taranis gimbal protection CN Tower by arovillard
...you feel like rocking the number one symbol from the 6, then it's all yours!
print in tpu at 0.3 layer height and 30% infill.
thingiverse
free
MORPHITE X 155 TOP PLATE by arovillard
...and infill rate you might choose to use one over the other.
for pla and 20% infill i use the 2mm, its very strong yet light (3g)
thingiverse
free
Elephant cookie cutters by arovillard
...u print it on pla (non toxic). please feel free to leave any feedback about the designs and if you have any other animal request.
thingiverse
free
Duplo base plate by arovillard
...long as the printer is calibrated properly it will work great.
sizes:
5" x 5"
7.5" x 7.5"
10" x 10"
thingiverse
free
SnowJoe 322P replacement plastic blade by arovillard
... and nuts to create the one piece that goes into the snow blower.
once my prints are done i'll make a video with the results.
thingiverse
free
Motor Protector ZMR250 by arovillard
...t from the side, and one version for the normal installation with the cables coming along the arm. use the one that works for you
Licious
3ddd
$1
Modu-licious
...t
модельный ряд фурнитуры:
modu-licious
ссылка:http://www.bludot.com/modern-living-room-furniture/storage-shelving.html
turbosquid
$4
Modu-licious Cabinet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Modu-licious Nightstand
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Modu-licious Square Dresser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
BLU DOT - Modu-licious
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$80
blu dot Modu-licious 6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Modu-licious Six Drawer Dresser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
BLU DOT
...blu dot 3ddd blu dot , тумба blu dot modu-licious bedside table модель md1-bdtb00 размеры 460х610х480...
3d_sky
free
Modu-licious
...dot lineup accessories: modu-licious reference:http://www.bludot.com/modern-living-room-furniture/storage-shelving.html
Popper
3ddd
$1
Bontempi Casa popper
...ntempi casa popper
3ddd
bontempi casa , угловой
итальянский диван bontempi casa - popper
turbosquid
$29
Push Popper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Push Popper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Push Popper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Push Popper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Push Popper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Push Popper(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Push Popper(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Push Popper(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Push Popper(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Lure
turbosquid
$1
Lure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
LURE
...lure
3ddd
светильники lurehttps://www.facebook.com/lurelamp
turbosquid
$50
Fishing Lure
...squid
royalty free 3d model fishing lure for download as c4d on turbosquid: 3d models for games, architecture, videos. (1459252)
turbosquid
$79
Bass Lures
...
royalty free 3d model bass lures for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1416846)
turbosquid
$3
Lure Ball
...d
royalty free 3d model lure ball for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1518718)
turbosquid
$10
Fishing Lure
... free 3d model fishing lure for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1435477)
turbosquid
$45
Pike Lure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Spoon Lure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
LURE POST WITH POPPIES
...odel lure post with poppies for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1441378)
turbosquid
$19
LURE CHANDELIER pelle
...model lure chandelier pelle for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1441333)
Fishing
archibase_planet
free
Fish
...fish
archibase planet
fish aquarium fish toy fish
fish n250113 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Fish
...fish
archibase planet
fish aquarium fish toy fish
fish n310113 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Fish
...fish
archibase planet
fish aquarium fish
fish - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Fish
...fish
archibase planet
fish aquarium fish
fish - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$200
Fish Red | Fish 3D | Fish devil | Fish fat
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
free
fish
...fish
3dexport
fish
3ddd
$1
fish
...fish
3ddd
рыба
fish
archibase_planet
free
Fish
...fish
archibase planet
fish sculpture statue
fish - 3d model for interior 3d visualization.
archibase_planet
free
Fish
...fish
archibase planet
fish picturesque element
fish - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Fish
...fish
archibase planet
fish picturesque element
fish - 3d model (*.gsm+*.3ds) for interior 3d visualization.