Thingiverse
Polysher Stand by rcaslis
by Thingiverse
Last crawled date: 3 years, 5 months ago
This isn't so much a remix as a re-imagining. With this version, you no longer need the black base plate - this takes over for that function.
Using this and a paperclip, you can hang parts and polish all slides with minimal blemishes.
Yes, this takes a long time to print and requires supports. It could be re-designed to print without supports and snap in, but I didn't think of that at the time.
UPDATE: I've included an updated, two-part stand. It prints faster and it stronger. It should hold together just by pressure but some alcohol-resistant adhensive wouldn't hurt. The updated files are stand_tower & stand_base.
Using this and a paperclip, you can hang parts and polish all slides with minimal blemishes.
Yes, this takes a long time to print and requires supports. It could be re-designed to print without supports and snap in, but I didn't think of that at the time.
UPDATE: I've included an updated, two-part stand. It prints faster and it stronger. It should hold together just by pressure but some alcohol-resistant adhensive wouldn't hurt. The updated files are stand_tower & stand_base.
Similar models
thingiverse
free
Bow Kid (A Hat in Time)
...t make the same mistake as i did and take screenshots from the ship, go to the reception at dead bird studios for a whiter light.
thingiverse
free
part of a chain by Bribro12
...pla .i haven't printed it yet with abs but i will try soon .it takes about 2 minutes to print on my printer .hope you like it
thingiverse
free
Ps4 Slim stand by mrjoeyman
...ng the rear stand wider for more support. most times you can't see the back stand very well anyway since it is in the back :)
thingiverse
free
Monitor Headphone Stand by Patrick_Fulton
...phones don't block monitor display when on stand
tree support used
update 29/12/2020
added extra support to strengthen part.
thingiverse
free
iPad Stand by tspeevack
...ipad stand by tspeevack
thingiverse
a simple, easy to print ipad stand that doesn't take a lot of time to print.
thingiverse
free
Phone Stand by MasterKam
...uess. enjoy and don't forget to update the print count. tell me if you liked it.
support: none
layer height: 0.15mm
pla, petg
thingiverse
free
Print in Place Bobcat Escavator by KyroPaul
...you will need to print supports (for the cab). as time permits i will update model to add more detail and test the print ability.
thingiverse
free
Headphone Stand by jeh241_makestuff
... and haven't had time to test it to make sure it works okay, so use at your own risk, and feel free to share your experience.
thingiverse
free
Chip 'n Dale - Rescue Rangers Blimp Plane by MrJansen82
..., but it will come soon.
update 31. marts 2020: the stl file for the bottle has been updated. it was missing one of the seats :-)
thingiverse
free
Phone / tablet stand by dgeral
... you will get a better result with supports.
you can edit these parts if you look for "denis geral" designs on onshape.
Rcaslis
thingiverse
free
Modular C Battery holder by rcaslis
...modular c battery holder by rcaslis
thingiverse
holder for 4 c batteries to complete the modular set.
thingiverse
free
Modular D Battery holder by rcaslis
...modular d battery holder by rcaslis
thingiverse
holder for 3 d batteries to complete the modular set.
thingiverse
free
Artisan Soap Dish (remixed) by rcaslis
...artisan soap dish (remixed) by rcaslis
thingiverse
wonderful artisan soap dish, remixed to remove the drainage holes.
thingiverse
free
Beam3D vat cover by rcaslis
...se
here's a cover for the vat on the beam3d. this makes it more reasonable to leave resin in your vat for a period of time.
thingiverse
free
Fidget Spinner (The Patriot) by rcaslis
...tic spinner. simple design - depends on 2 filament changes to create a red/white/blue effect... plus one 608 bearing, of course.
thingiverse
free
Robo R1 filament guide by rcaslis
...this is a simple filament guide for the r1 that's inspired by the filament guide supplied with the r1+.
print at 100% infill.
thingiverse
free
Weather Station (remixed) by rcaslis
...amp; back thicker, added a wall-mount, and removed the holes for micosd card & external switch (i.e. just the usb port open).
thingiverse
free
QUBD OneUp/TwoUp extruder bearing holder by rcaslis
...qubd oneup/twoup extruder bearing holder by rcaslis
thingiverse
now with deeper teeth to grab the x-belt
thingiverse
free
Small Spinner by rcaslis
...... plus superglue.
i used glow-in-the-dark filament plus red & pink filament as she specifically asked for glow-in-the-dark.
thingiverse
free
Zuru Hamster Track (straight) by rcaslis
...lost her only straight piece of track for her zuru hamster playset. this isn't perfect, but it's a suitable replacement.
Polysher
3d_export
$8
Wind turbine 3D Model
...olyshed for body, aluminium polyshed for propellermade with 3ds max ver. 2011.formats: 3ds, max, wrlall formats have been tested.
thingiverse
free
Polysher Platform by Polymaker_3D
...h to print new platforms, we suggest a pla such as polymax for best results.
what is the polysher??
https://youtu.be/w20ypcbvoqg
thingiverse
free
![Polishing Stand for Polymakers Polysher [Medium] by 3DTechSupplies](/t/8760247.jpg)
Polishing Stand for Polymakers Polysher [Medium] by 3DTechSupplies
...ers polysher with our hanging stand!
article: http://www.3dtechsupplies.com.au/news/exploring-polymakers-polysher-and-polysmooth
thingiverse
free
Polysher Platform (with drain Holes) by bolsoncerrado
...slowed down while waiting for platforms to free up.
drain holes allow for less ipa lost when removed and further fog circulation.
thingiverse
free
Polysher Platform by LoratailCosplay
...int tolerance built in. what this means is that each hole is 0.4mm larger than it needs to be to account for printer shenanigans.
thingiverse
free
Polysher Platform Remix by bennyjohnson
...t instructions once i am complete. i decided to remix an existing polysher platform i found here on thingiverse to suit my needs.
thingiverse
free
Circular Platforms (w/o holes) for PolyMaker's PolySher by Z122
...s to polymaker for their great filament materials and for this great polysher.
(hope to be able to use the polydryer soon... ;-)
thingiverse
free
Polysher Wedge by Djkirkendall
... was spit in half (20/20), and the model rotated to 180 degrees to coat the other side. this is a must for tall, vertical models!
thingiverse
free
The Laughing Buddha by Polymaker_3D
...new polysmooth filament and post-processed in the polysher more information:https://www.kickstarter.com/projects/polymaker/polysmooth-and-polysher3d-prints-without-layers ...
Stand
turbosquid
$50
stand watermelon stand
...yalty free 3d model stand watermelon stand for download as ma on turbosquid: 3d models for games, architecture, videos. (1528284)
archibase_planet
free
Stand
...stand
archibase planet
stand post pole
stand - 3d model for interior 3d visualization.
archibase_planet
free
Stand
...stand
archibase planet
stand sport barbell
stand kettler - 3d model for interior 3d visualization.
archibase_planet
free
Stand
...stand
archibase planet
locker drawer stand
stand 897810 - 3d model for interior 3d visualization.
archibase_planet
free
Stand
...stand
archibase planet
stand rack post
stand 2 - 3d model for interior 3d visualization.
archibase_planet
free
Stand
...stand
archibase planet
stand storefront shelving
stand 3 - 3d model for interior 3d visualization.
archibase_planet
free
Stand
...stand
archibase planet
stand shelf shelving
stand 4 - 3d model for interior 3d visualization.
archibase_planet
free
Stand
...stand
archibase planet
stand post stall
stand 5 - 3d model for interior 3d visualization.
archibase_planet
free
Stand
...stand
archibase planet
stand post stall
stand 6 - 3d model for interior 3d visualization.
archibase_planet
free
Stand
...stand
archibase planet
stand post shelving
stand 7 - 3d model for interior 3d visualization.