Polar Keychains by seth9008

Last crawled date: 3 years ago

I did this keychains to be printed in two colors
I used Cura and with 0.2mm of height i have 20 layers. I start printing with Black color and then i need to add two "Pauses at Height" for filament change. You can do it modifying the G-Code from the option on Cura (Extensions -> Postprocessing -> Modify G-Code)
At layer 10 with this parameters (Only modify these)
-Park Printhead X: 15
-Park Printhead Y: 15
-Retracction: 40
-Extrude amount: 70 (Or the value to get the more previos color out from nozzle)
-Standby Nozzle Teperature: 200°C (or the print temp you use for your filamet)
Change to White filament
At layer 15 with same previous parameters
change to black filamernts for final details