Thingiverse
PlectrumBox by GrimbiXcode
by Thingiverse
Last crawled date: 5 years, 2 months ago
Material
First, I printed the Box with PLA with an infill of 40%.
For the second print, I used wooden filament and an infill of 100%.
Tip: If you won't to infill at 100%, set the wall thickness to 2 x Extruderdiameter or you will see the points of intersection.
Be careful...
.. when you open the box for the first time ;)
First, I printed the Box with PLA with an infill of 40%.
For the second print, I used wooden filament and an infill of 100%.
Tip: If you won't to infill at 100%, set the wall thickness to 2 x Extruderdiameter or you will see the points of intersection.
Be careful...
.. when you open the box for the first time ;)