Plate to secure the ailerons horn on the Freewing Avantis by Pascandrea

Last crawled date: 3 years ago

These plates are made to secure the ailerons on the Freewing AvantiS,
some planes had bad crashes because the aileron horn wasn't very well glued
so with this plate you can secure them, you can glued them (in this case just use the downer one) or screw them (upper and downer one together)
if you want to use the screw just make a 2mm holes on the plate who will be in contact with the horn and 1.5 mm on the other side, i made 3 size for the upper one, a thick one (small and large) and a thin one, for the screw just use a 2mm diameter screw and cut what you don t need ...
PS : the parts have a chamfer (on the top) so the parts must be turned at 180 degrees on the slicer to have it on the top
update : i made a new plate (2.4), with this one you do not need to use some screws, you just need to glue it, i printed it 0.1mm, don t reverse it at 180 degrees, very nice finished ...