Thingiverse
![Plaster Ground for Moen Faucet installation - Oversize](/previews/4834478.jpg)
Plaster Ground for Moen Faucet installation - Oversize
by Thingiverse
Last crawled date: 4 years, 3 months ago
This is a replacement plaster ground for a Moen diverter valve. I was replacing an old shower/tub valve and the hole in the tub enclosure was too big. I designed this oversized plaster ground (that's what Moen calls it) so that the new valve installed without any problems.
The STL is not exactly what is pictured- I had to make some "field modifications" to the original and encompased those changes to the model. I used a .2 layer height and it was a 16 hour print!
I included a version that is a replacement for the original plaster ground, also, in case you drop it and break it (ask me how I know this can happen).
The STL is not exactly what is pictured- I had to make some "field modifications" to the original and encompased those changes to the model. I used a .2 layer height and it was a 16 hour print!
I included a version that is a replacement for the original plaster ground, also, in case you drop it and break it (ask me how I know this can happen).
Similar models
thingiverse
free
![Moen Knob for tub DAILSET tub faucet by buzzerco](/t/8887510.jpg)
Moen Knob for tub DAILSET tub faucet by buzzerco
...aucet by buzzerco
thingiverse
updated: added cap stl file
i finally made a cap for the knob
moen knob for tub dailset tub faucet
thingiverse
free
![Valve wall hole cover by bytezar](/t/8147033.jpg)
Valve wall hole cover by bytezar
...2 inch).
original valve was in the plaster of wall, so to replace it i had to make hole.
i created this model to covet that hole.
thingiverse
free
![Moen Shower Knob Posi-Temp style by i3DSystems](/t/8688750.jpg)
Moen Shower Knob Posi-Temp style by i3DSystems
...drgn for the original standard moen faucet knob design, that mine was remixed from ... https://www.thingiverse.com/thing:531515
thingiverse
free
![Replacement knob for Moen showers by Carnildo](/t/8285558.jpg)
Replacement knob for Moen showers by Carnildo
...body and 0.15mm for the faceplate. nylon or abs may be decent alternative materials; i don't think pla would work very well.
thingiverse
free
![Moen Shower Knob Replacement Handle by rapple3](/t/8639873.jpg)
Moen Shower Knob Replacement Handle by rapple3
... shower knob kept breaking and rather than keep buying the replacement knob, i opted to create a better and easier to use handle.
thingiverse
free
![Hot Tub Diverter Handle by bassman6805](/t/8869810.jpg)
Hot Tub Diverter Handle by bassman6805
...n 11mm post. it fits the larger diverter valves. this one was made to replace a broken switch on a four winds maverick hot tub.
thingiverse
free
![Adapter pump tube to Boston valve for kites by theodroid](/t/8810562.jpg)
Adapter pump tube to Boston valve for kites by theodroid
...at the third picture to see what is a boston valve.
if you printed it, please click on "i made one" and upload a photo!
thingiverse
free
![Moen Faucet Tool by n8foo](/t/8575551.jpg)
Moen Faucet Tool by n8foo
...d it held up no problem, so you may not need the knobs.
i blogged about it here: http://n8foo.com/blog/3d-printing-plumbing-tools
thingiverse
free
![IOIO HT2000 Electronic Thermostat to Danfoss RAVL adapter and lock by DonJuanito](/t/8138113.jpg)
IOIO HT2000 Electronic Thermostat to Danfoss RAVL adapter and lock by DonJuanito
...e.
after a month of use, the 8 valves with added locks are in perfect condition and the heads are still strongly held in place...
thingiverse
free
![Valve spring compressor adapter for C-clamp by dustin1706](/t/8670194.jpg)
Valve spring compressor adapter for C-clamp by dustin1706
...valve spring retainers.
obviously, this one may not fit your application, but hopefully this gives you the idea to make your own!
Moen
thingiverse
free
![Moen Faucet Handle Adapter by ksaathoff](/t/8990494.jpg)
Moen Faucet Handle Adapter by ksaathoff
...by ksaathoff
thingiverse
these are replacement parts to fix broken moen faucet handle adapters on for the sinks in my bathrooms.
thingiverse
free
![Moen Faucet Tool by n8foo](/t/8575551.jpg)
Moen Faucet Tool by n8foo
...d it held up no problem, so you may not need the knobs.
i blogged about it here: http://n8foo.com/blog/3d-printing-plumbing-tools
thingiverse
free
![Shower Knob (Moen) by NorthernMaker](/t/8795048.jpg)
Shower Knob (Moen) by NorthernMaker
... of the slot of the fixture. if it doesn't fit, change the screw_shaft_id for the screw or the screw_shaft_flat for the slot.
thingiverse
free
![Moen Faucet Tool](/t/4932902.jpg)
Moen Faucet Tool
...n for the test fitting). moen sent my mom a whole new faucet which came with a new tool but i figured someone else might need it.
thingiverse
free
![Handle loop for Moen faucets by cperalta](/t/8555758.jpg)
Handle loop for Moen faucets by cperalta
...ge and proper fitting. i used abs, so part needed to be scaled to 106%.
-print does not need any supports if printed on its side.
thingiverse
free
![Moen Shower Knob Replacement Handle by rapple3](/t/8639873.jpg)
Moen Shower Knob Replacement Handle by rapple3
... shower knob kept breaking and rather than keep buying the replacement knob, i opted to create a better and easier to use handle.
thingiverse
free
![Moen Knob for tub DAILSET tub faucet by buzzerco](/t/8887510.jpg)
Moen Knob for tub DAILSET tub faucet by buzzerco
...aucet by buzzerco
thingiverse
updated: added cap stl file
i finally made a cap for the knob
moen knob for tub dailset tub faucet
thingiverse
free
![Moen GXP50C Garbage Disposal Cap by RedPark](/t/9675208.jpg)
Moen GXP50C Garbage Disposal Cap by RedPark
... draining into the dishwasher, it fits on a moen gxp50c garbage disposal cap and with thread seal tape it will prevent any leaks.
thingiverse
free
![Moen Spanner Wrench by trnpsycho](/t/8493649.jpg)
Moen Spanner Wrench by trnpsycho
...bottom of my sink due to the angle, so this gave me a little more leverage. maybe you'll find it useful as well. maybe not...
thingiverse
free
![Moen internal faucet part by IAndrade](/t/8666685.jpg)
Moen internal faucet part by IAndrade
...ament. the original part was just too tight to use, both with placing onto the stem and placing the handle onto the printed part.
Plaster
thingiverse
free
![Barbie on crutches and plaster by texano](/t/8943893.jpg)
Barbie on crutches and plaster by texano
...barbie on crutches and plaster by texano
thingiverse
barbie on crutches and plaster
to be original
thingiverse
free
![Plaster Tools by kwixson](/t/9043030.jpg)
Plaster Tools by kwixson
...tch up jobs and maybe modeling/hobby. this thing was made with tinkercad. edit it online https://tinkercad.com/things/a2joiosg8sl
thingiverse
free
![Plaster Panel - Drywall Dowel by betaxx](/t/8533710.jpg)
Plaster Panel - Drywall Dowel by betaxx
...plaster panel - drywall dowel by betaxx
thingiverse
this thing use for screwing parts to plaster panel drywall.
thingiverse
free
![Glandes plaster mold by something2do](/t/9225957.jpg)
Glandes plaster mold by something2do
...glandes plaster mold by something2do
thingiverse
thingiverse
free
![mold for casting plaster molds for aluminum Cross by Dzecko](/t/8902573.jpg)
mold for casting plaster molds for aluminum Cross by Dzecko
...mold for casting plaster molds for aluminum cross by dzecko
thingiverse
mold for casting plaster molds for aluminum cross
thingiverse
free
![My Plaster Head by cummings9306](/t/8969584.jpg)
My Plaster Head by cummings9306
...my plaster head by cummings9306
thingiverse
scanned with the makerbot digitizer desktop 3d scanner
thingiverse
free
![Rounded Corner Plaster Scraper by rodneyk](/t/8786634.jpg)
Rounded Corner Plaster Scraper by rodneyk
...off the excess with this little tool. the two straight edges should make contact with the edges of the wall at all times.
enjoy!
thingiverse
free
![Plaster tray by roystan](/t/8030867.jpg)
Plaster tray by roystan
...giverse
made this design with tinkercad. looks amazing although its hard to print the + (first aid sign) at the top of the case.
thingiverse
free
![sticking plaster by WillandMrData2](/t/8903831.jpg)
sticking plaster by WillandMrData2
...int".
skp "sketchup" a b
non commercial, no derivatives.
bye for now and be well from will and mr data :) :]
thingiverse
free
![Egyptian Plaster Bust 3D Scan by 3DWP](/t/8820866.jpg)
Egyptian Plaster Bust 3D Scan by 3DWP
...ry good and high quality, i made a plane cut and scaled and oriented the model for 3d printing with meshmixer.
http://www.3dwp.nl
Faucet
thingiverse
free
![Faucet](/t/4980561.jpg)
Faucet
...faucet
thingiverse
just a quick little faucet
thingiverse
free
![Faucet by Shiongle](/t/8703384.jpg)
Faucet by Shiongle
...faucet by shiongle
thingiverse
faucet
thingiverse
free
![Faucet Handle](/t/5002402.jpg)
Faucet Handle
...elbows.
it might require a bit of hot glue to stay on the faucet as well as some slight modification to fit your specific faucet.
thingiverse
free
![Faucet by karazhanov](/t/8522341.jpg)
Faucet by karazhanov
...faucet by karazhanov
thingiverse
faucet with hot & cold plug
thingiverse
free
![faucet neck retainer ring for uberhaus faucet](/t/4758181.jpg)
faucet neck retainer ring for uberhaus faucet
...the neck of the faucet in the manifold. printed in pla 100% infill. i assume this part is similat to those used in other faucets.
thingiverse
free
![Faucet converter by jakecastro1](/t/8145492.jpg)
Faucet converter by jakecastro1
...faucet converter by jakecastro1
thingiverse
faucet connection converter for older star faucet ends.
thingiverse
free
![Faucet Cap for Delta Bath Faucet by billprozac](/t/8852005.jpg)
Faucet Cap for Delta Bath Faucet by billprozac
...lprozac
thingiverse
replacement part for the center cap of a delta bathtub faucet. used paints to color the hot and cold parts.
thingiverse
free
![Faucet Handle by Perugino](/t/8881560.jpg)
Faucet Handle by Perugino
...faucet handle by perugino
thingiverse
this faucet grip was used on a stainless steel container faucet. it might fit yours.
thingiverse
free
![Faucet wrench](/t/4874209.jpg)
Faucet wrench
...hard time trying to fasten it. so i decided to take the matter in my own hands and designed and printed a handy tool.
have fun ;)
thingiverse
free
![Heating faucet by Woodruff](/t/8061881.jpg)
Heating faucet by Woodruff
...heating faucet by woodruff
thingiverse
heating faucet replacement
Oversize
thingiverse
free
![Oversized key by BubaLettow](/t/8644743.jpg)
Oversized key by BubaLettow
...ized key by bubalettow
thingiverse
an oversized key, easy to print used for a theater production but could be used for anything.
thingiverse
free
![Overseer token holder by maboulton](/t/8701135.jpg)
Overseer token holder by maboulton
...overseer token holder by maboulton
thingiverse
token holder for the overseer board game
thingiverse
free
![Oversize Hook for Shower Rings by msadler2](/t/8349275.jpg)
Oversize Hook for Shower Rings by msadler2
...oversize hook for shower rings by msadler2
thingiverse
an oversized hook to use with your shower curtain rings.
thingiverse
free
![Halloween Cookie Cutters - Oversized by Scribbless](/t/8095948.jpg)
Halloween Cookie Cutters - Oversized by Scribbless
... by scribbless
thingiverse
these are oversized cookie cutters i created for a friend. they are large, so pay attention to that.
thingiverse
free
![Oversized Egg Feet Holder by hassallthehoff](/t/9038588.jpg)
Oversized Egg Feet Holder by hassallthehoff
...oversized egg feet holder by hassallthehoff
thingiverse
a pair of oversized novelty egg cup shoes, to hold your egg this easter
thingiverse
free
![Oversized Magic The Gathering Card Holder by jmyers808](/t/8887789.jpg)
Oversized Magic The Gathering Card Holder by jmyers808
...oversized magic the gathering card holder by jmyers808
thingiverse
this is a holder for oversize magic the gathering cards
thingiverse
free
![GoPro Oversized Thumbwheel V1.3 by IntenseDef](/t/8557003.jpg)
GoPro Oversized Thumbwheel V1.3 by IntenseDef
...bwheel v1.3 by intensedef
thingiverse
gopro oversized thumbwheel v1.3
revised to v1.3 - stronger, drilled out, larger dia. wheel
thingiverse
free
![Pelton oversized transport by lebois43](/t/8592615.jpg)
Pelton oversized transport by lebois43
...pelton oversized transport by lebois43
thingiverse
support for pelton turbine
thingiverse
free
![2 piece oversized throwing knife by nunthok3D](/t/8944431.jpg)
2 piece oversized throwing knife by nunthok3D
...2 piece oversized throwing knife by nunthok3d
thingiverse
easy printing 2 piece oversized kunai throwing knife
thingiverse
free
![Oversized Pepperbox gun by Snorri](/t/8826702.jpg)
Oversized Pepperbox gun by Snorri
...for a regular size), the barrel moves, just add a m5 screw between the 2 body halves before glueing, and a bolt inside the canon.
Ground
thingiverse
free
![Grounding Strap Mounts and Cover](/t/4864536.jpg)
Grounding Strap Mounts and Cover
...round strap is handy to use in the case you want to use a local common ground and run a large wire to the vehicle/battery ground.
thingiverse
free
![green ground with trees by osultanoglu](/t/8019983.jpg)
green ground with trees by osultanoglu
...green ground with trees by osultanoglu
thingiverse
green ground with trees
thingiverse
free
![fpv ground stations by tank21236](/t/9002569.jpg)
fpv ground stations by tank21236
...fpv ground stations by tank21236
thingiverse
5.8g fpv ground stations
thingiverse
free
![Ground Zero keychain by daniksz](/t/8351792.jpg)
Ground Zero keychain by daniksz
...ground zero keychain by daniksz
thingiverse
ground zero
ideal for bicolor printing
thingiverse
free
![Geeetech Ground Fixer by Loewie](/t/8820926.jpg)
Geeetech Ground Fixer by Loewie
...geeetech ground fixer by loewie
thingiverse
holders to fix your printer to the ground
stability improvements
thingiverse
free
![Resistant Ground support by Mike9669](/t/8063682.jpg)
Resistant Ground support by Mike9669
...resistant ground support by mike9669
thingiverse
simple resistan design for a multipurpose ground support. (specially for tents)
thingiverse
free
![Zlinks to ground by Cypheromen](/t/8806683.jpg)
Zlinks to ground by Cypheromen
...is is a mounting bracket for the zlinks system. still very much a early work in progress would love feed back and design changes.
thingiverse
free
![Ground Loop Isolator Mount](/t/4986814.jpg)
Ground Loop Isolator Mount
... isolator mount
thingiverse
this is a mount for a ground loop isolator such as the one shown in the photo. print with supports.
thingiverse
free
![FPV ground Station by smithpak](/t/8676660.jpg)
FPV ground Station by smithpak
...fpv ground station by smithpak
thingiverse
a ground station to hold a receiver, dvr monitor and battery made in abs
thingiverse
free
![jewelry tree ground by Rattiso](/t/9033513.jpg)
jewelry tree ground by Rattiso
...jewelry tree ground by rattiso
thingiverse
this ground is 110 mm :)
i scale the three 0,95 before print
Installation
thingiverse
free
![Washer Installation Tool](/t/4875584.jpg)
Washer Installation Tool
...washer installation tool
thingiverse
killed my fingers installing retaining washers on captive screws, so i made this
thingiverse
free
![Door Lock/No Install by KreepyKoopa](/t/8505268.jpg)
Door Lock/No Install by KreepyKoopa
...door lock/no install by kreepykoopa
thingiverse
a no install door lock
thingiverse
free
![STAS Minirail Installation Jig](/t/4733929.jpg)
STAS Minirail Installation Jig
...iling as the directions state, and the bar is 150cm long, one half of the recommended spacing between the holes for installation.
thingiverse
free
![platform for installing servos on the bridge by SevaGetz](/t/8239903.jpg)
platform for installing servos on the bridge by SevaGetz
...platform for installing servos on the bridge by sevagetz
thingiverse
platform for installing servos on the bridge.
thingiverse
free
![Office Monster :-) by Installer](/t/8935218.jpg)
Office Monster :-) by Installer
...office monster :-) by installer
thingiverse
it is made after this piece: http://www.thingiverse.com/thing:18279
thingiverse
free
![G29 Easy installation (Wide mousepad)](/t/4970861.jpg)
G29 Easy installation (Wide mousepad)
...g29 easy installation (wide mousepad)
thingiverse
g29 easy installation (wide mousepad)
thingiverse
free
![Shower Drain Installation Tool by jlenex](/t/8550177.jpg)
Shower Drain Installation Tool by jlenex
...r drain. i had a shower to install but didn't have the tool to do it. one time install wasn't worth buying a tool.
enjoy
thingiverse
free
![Skill badge - electrical installations by maffucci](/t/8879158.jpg)
Skill badge - electrical installations by maffucci
...skill badge - electrical installations by maffucci
thingiverse
skill badge for my students - electrical installations
thingiverse
free
![Wyze Splinkler Wall Instalation by fatoro123](/t/8235523.jpg)
Wyze Splinkler Wall Instalation by fatoro123
...by fatoro123 thingiverse wyze splinkler wifi device wall flush installation ...
thingiverse
free
![Pegboard Installation Brackets and Supports by HakaTo](/t/5023497.jpg)
Pegboard Installation Brackets and Supports by HakaTo
...stal pegboard. i designed the parts to my need. you can install a pegboard solo using these pieces.the pegboard thickness is 8mm.