Plane by screwit

Last crawled date: 3 years, 1 month ago

This is really fast project you can do. This plane designed to fly! Almost no cost required. Fave fun!
Materials:
1x straw with 5mm diameter and a length between 7-8 inches or 18-21 cm;
1x Nut with 5mm inner diameter (N10);
3x or more plane suport frame (STL file);
1x A4 cardboard with ~0.6mm thickness;
First you need to put plane's supports on straw. Then print, cut and put the wings on the frame. You can put duck tape or super glue on wings to make sure they do not came off with crashes. Finally put the nut on plane's nose, this will a balance your plane. Make sure the nut is secure. You will need to find the balance of your plane between the nut and the wings to plane fly.
Comment if you make it and what was your difficulty. Also follow me on Instagram for more projects @screw._it