Plague Doctor Syringe by Horstilon 3d model
3dmdb logo
Thingiverse
Plague Doctor Syringe by Horstilon

Plague Doctor Syringe by Horstilon

by Thingiverse
Last crawled date: 4 years, 5 months ago
What to print:
You need the "Ring" three times. Every other part is only needed once.
How to assemble:

Glue 2 of the 3 body-rings onto the "handle-holder" part.
The remaining ring is glued onto the "plunger-cap"


Screw the handle-holder and the fluid onto the body. Both go in thread first.


Put the Body-Ring onto the fluid.


Screw the needleside-cap and the needle onto the fluid.


Pull the plungerside-cap over the plunger, thread first.


Screw the plunger into the plunger-cap

Push the plunger-assembly into the syringe and screw it onto the handle-holder.
Et voilà
You could print the Body and Body-Ring as one object, if you used support material.

Tags