Thingiverse
![Pitot Tube Mini-Mount by markqv](/previews/8784871.jpg)
Pitot Tube Mini-Mount by markqv
by Thingiverse
Last crawled date: 3 years, 1 month ago
After printing several Pitot tube mounts and finding them all too big and obtrusive, I decided to go the minimalist approach and create one that will mount under the leading edge of the wing or on the side of the fuselage nose. It is a two piece print that will accomodate many of the all metal pitot tubes sold by most FPV suppliers. A drawing of the metal pitot tube I used for this is included for reference.
To install, simply trace the outline of the mount base under the wing where the leading edge angle keeps the tube level (about 18mm back on my Mini Talon). Next, carve a shallow area inside the marks and glue the base in. Then use thin servo tape or rubber glue to mount the pitot tube in the tube mount and snap on the mount cover. Now you need to run the hoses slightly in-laid into the wing to where you want the sensor. I will use nylon antenna wire tubing for this.
To install, simply trace the outline of the mount base under the wing where the leading edge angle keeps the tube level (about 18mm back on my Mini Talon). Next, carve a shallow area inside the marks and glue the base in. Then use thin servo tape or rubber glue to mount the pitot tube in the tube mount and snap on the mount cover. Now you need to run the hoses slightly in-laid into the wing to where you want the sensor. I will use nylon antenna wire tubing for this.
Similar models
thingiverse
free
![Eagle Tree Vector - Pitot Tube Mount #2 by markqv](/t/8682565.jpg)
Eagle Tree Vector - Pitot Tube Mount #2 by markqv
...e. the base has two 1.6mm holes which are tapped for m2 screws. i recommend printing at 0.1mm resolution and a fairly slow speed.
thingiverse
free
![Pitot Tube Mount for BMI Arrow 1500 by mortenp](/t/9018212.jpg)
Pitot Tube Mount for BMI Arrow 1500 by mortenp
...like the one sold by 3drobotics - to the wing of a bmi arrow 1500. it should be easy to adjust the design to other wing profiles.
thingiverse
free
![Pitot Tube holder](/t/4701171.jpg)
Pitot Tube holder
...pitot tube holder
thingiverse
pitot tube holder for s800 for mounting on the wing.
it will probably fitt on any other airplane.
thingiverse
free
![Pixhawk pitot tube holder by Kopernico](/t/8555135.jpg)
Pixhawk pitot tube holder by Kopernico
...ot tube holder by kopernico
thingiverse
this is my version of the pitot tube mount that will be installed on a fixed wing drone.
thingiverse
free
![RC Pitot Tube Cover by Veteq](/t/8729896.jpg)
RC Pitot Tube Cover by Veteq
...e of each side. glue together with the tube in place. i inset my holder into the fuselage by 1/8 inch and hysoled it into place.
thingiverse
free
![pitot tube holder for fy 41 lite by Jagar](/t/8682660.jpg)
pitot tube holder for fy 41 lite by Jagar
... can use m3 screws instead.
the pitot tube holds in place by preassure, no glue/screws needed.
in case you need help, just ask ;)
thingiverse
free
![RiteWing MiniDrak FC Mount by DirtyDogFPV](/t/8263518.jpg)
RiteWing MiniDrak FC Mount by DirtyDogFPV
...own to the wing. there are two holes on top where you can add rubbing alcohol to loosen the glue and remove if you want it gone.
thingiverse
free
![My Twin Dream - Pitot Mount by markab](/t/8822380.jpg)
My Twin Dream - Pitot Mount by markab
...glue the mount on, designed for a 6mm pitot similar to the eagle tree vector pitot...
thingiverse
free
![Eagle Tree Vector Pitot Tube Mini-Mount by jwellman](/t/8774668.jpg)
Eagle Tree Vector Pitot Tube Mini-Mount by jwellman
...eagle tree vector pitot tube mini-mount by jwellman
thingiverse
just a few mods to make the eagle tree vector pitot tube work.
thingiverse
free
![Eagle Tree Vector - Pitot Tube Mount by markqv](/t/8735203.jpg)
Eagle Tree Vector - Pitot Tube Mount by markqv
... the file to get both halves.
i printed this in pla+ but will re-do it in abs to get the uv protection. the resolution was 0.1mm.
Markqv
thingiverse
free
![OrangeRX Transmitter (TX) Cover by markqv](/t/8949237.jpg)
OrangeRX Transmitter (TX) Cover by markqv
... (tx) cover by markqv
thingiverse
a replacement orangerx, jr module cover which moves the antenna sma port to a usable position.
thingiverse
free
![Dynamic Motor and Prop Balancer by markqv](/t/8636073.jpg)
Dynamic Motor and Prop Balancer by markqv
...ynamic-propeller-balancer-build
to see my complete build:http://www.itsqv.com/qvm/index.php?title=dynamic_motor_and_prop_balancer
thingiverse
free
![FrSky/Turnigy Gimbal Savers by markqv](/t/8782882.jpg)
FrSky/Turnigy Gimbal Savers by markqv
... extension screw acting to hold it all in place. the turnigy 9xr set is four pieces and snaps together with a small center piece.
thingiverse
free
![Turnigy 9XR & 9XR Pro Feet and Stand by markqv](/t/8949270.jpg)
Turnigy 9XR & 9XR Pro Feet and Stand by markqv
...d 1/23 - added more material around the screw)
download and print the two stand parts and you'll have all your bases covered.
thingiverse
free
![Eagle Tree Vector - Pitot Tube Mount #2 by markqv](/t/8682565.jpg)
Eagle Tree Vector - Pitot Tube Mount #2 by markqv
...e. the base has two 1.6mm holes which are tapped for m2 screws. i recommend printing at 0.1mm resolution and a fairly slow speed.
thingiverse
free
![X-UAV Talon Rear Skid by markqv](/t/8306061.jpg)
X-UAV Talon Rear Skid by markqv
...ing bed
overhang angle - 70 degrees
support infill - 12%
print speed - 40mm/sec
print density - 65% or higher
target weight - 16g
thingiverse
free
![RunCam Split -v2- Simple Case by markqv](/t/8611803.jpg)
RunCam Split -v2- Simple Case by markqv
...; v2, please see my pan and tilt parts catalog here - http://www.itsqv.com/qvm/index.php?title=parts_catalog_-_pan_and_tilt_parts
thingiverse
free
![Lipo Battery Strap Guide by markqv](/t/8784910.jpg)
Lipo Battery Strap Guide by markqv
...d it also keeps the strap from being damaged on landing. inside the fuse i glue down strips of velcro to help stabilize the pack.
thingiverse
free
![Collapsible Bungee Tow Hook by markqv](/t/8802498.jpg)
Collapsible Bungee Tow Hook by markqv
... find the aluminum tube material at a local hobby store. then follow the picture on drilling and shaping the tube befor assembly.
thingiverse
free
![Zeta Phantom FX-61 Parts v1 by markqv](/t/8820789.jpg)
Zeta Phantom FX-61 Parts v1 by markqv
...re: http://www.itsqv.com/qvm/index.php?title=zeta_fx-61_phantom_wing_number_2
all parts were printed in pla.
happy printing!
mark
Pitot
thingiverse
free
![Pitot Tube holder](/t/4701171.jpg)
Pitot Tube holder
...pitot tube holder
thingiverse
pitot tube holder for s800 for mounting on the wing.
it will probably fitt on any other airplane.
thingiverse
free
![Airspeed Sensor/Pitot Holder](/t/4666005.jpg)
Airspeed Sensor/Pitot Holder
...speed sensor/pitot holder
thingiverse
airspeed sensor/pitot holder. for 3dr, mpxv7002dp and similar sensors. and pitot tube lid.
thingiverse
free
![Pitot Tube by dudsmake](/t/8706865.jpg)
Pitot Tube by dudsmake
...
this thing is a pitot tube mount. it is intended for use with a pixhawk flight controller, or similar. it is a work in progress.
thingiverse
free
![Pitot tube mount by donandtheresa](/t/8861165.jpg)
Pitot tube mount by donandtheresa
...pitot tube mount by donandtheresa
thingiverse
mount for pitot tube on my rvjet
thingiverse
free
![Tube de Pitot by LABOMALIN](/t/8131094.jpg)
Tube de Pitot by LABOMALIN
...ique des fluides.
raccord et soufflerie conseillées à trouver sur notre site web.
https://www.labomalin.fr/produit/tube-de-pitot/
thingiverse
free
![RVOSD Airspeed pitot holder by kbirand](/t/9269270.jpg)
RVOSD Airspeed pitot holder by kbirand
...rvosd airspeed pitot holder by kbirand
thingiverse
as understood from its title it is a holder for the rvosd pitot
thingiverse
free
![Pitot / Static Tube Mount by Bbtapb](/t/8122342.jpg)
Pitot / Static Tube Mount by Bbtapb
...pitot / static tube mount by bbtapb
thingiverse
this mount is designed for an aluminum pitot/static tube from ebay
thingiverse
free
![Freewing Gripen pitot by kallend](/t/8087818.jpg)
Freewing Gripen pitot by kallend
...tot which is rather exposed to damage.
in response to requests i have also posted versions with shorter and less fragile probes.
thingiverse
free
![Pixhawk pitot tube holder by Kopernico](/t/8555135.jpg)
Pixhawk pitot tube holder by Kopernico
...ot tube holder by kopernico
thingiverse
this is my version of the pitot tube mount that will be installed on a fixed wing drone.
thingiverse
free
![Eagletree pitot tube mount by poboy](/t/8981612.jpg)
Eagletree pitot tube mount by poboy
...eagletree pitot tube mount by poboy
thingiverse
mount designed to hold an eagletree pitot tube and secure it to a foam plane.
Tube
archibase_planet
free
![Tube](/t/949914.jpg)
Tube
...tube
archibase planet
paint tube stationery
tube - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
free
![tube](/t/13320432.jpg)
tube
...tube
turbosquid
free 3d model tube for download as c4d on turbosquid: 3d models for games, architecture, videos. (1378271)
archibase_planet
free
![Tube](/t/948291.jpg)
Tube
...tube
archibase planet
mascara cosmetics make-up
tube 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
![Tube pants](/t/12843625.jpg)
Tube pants
...tube pants
3dexport
tube pants
3d_export
free
![Tube](/t/11401668.jpg)
Tube
...tube
3dexport
turbosquid
free
![TUBE](/t/13373783.jpg)
TUBE
...
free 3d model tube for download as blend, dae, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1672199)
turbosquid
$29
![tube](/t/13523347.jpg)
tube
...lty free 3d model tube for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1442047)
3ddd
$1
![perfume tube](/t/378654.jpg)
perfume tube
...perfume tube
3ddd
тюбик
perfume tube, тюбик
3ddd
$1
![Olivieri Tube](/t/794616.jpg)
Olivieri Tube
...olivieri tube
3ddd
olivieri
кровать olivieri tube
turbosquid
$22
![Tube](/t/13376984.jpg)
Tube
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Mini
turbosquid
$10
![Mini Mini Luceplan](/t/13457783.jpg)
Mini Mini Luceplan
...
royalty free 3d model mini mini luceplan for download as max on turbosquid: 3d models for games, architecture, videos. (1227359)
3d_ocean
$39
![Mini Cooper](/t/567543.jpg)
Mini Cooper
...mini cooper
3docean
cabrioler cooper mini
mini cooper cabrioler
3d_export
$30
![Mini lathe](/t/12401292.jpg)
Mini lathe
...mini lathe
3dexport
mini lathe
3d_export
$5
![mini mouse](/t/11460646.jpg)
mini mouse
...mini mouse
3dexport
mini mouse
3d_export
$5
![mini house](/t/11460303.jpg)
mini house
...mini house
3dexport
mini house
3d_export
free
![Mini Mecha](/t/11928245.jpg)
Mini Mecha
...mini mecha
3dexport
concept of mini mecha
3d_ocean
$20
![Mini Gun](/t/369001.jpg)
Mini Gun
...mini gun
3docean
gatling gun gun machine gun mini gun weapon
model of a mini gatling gun.
3ddd
free
![Herve mini](/t/628699.jpg)
Herve mini
... кофейный , herve
http://www.mobiliavenanti.it/ru/products/hervè-mini
3d_export
$5
![mini wall](/t/11419293.jpg)
mini wall
...mini wall
3dexport
mini wall for living room
3d_export
$5
![mini bank](/t/11716530.jpg)
mini bank
...mini bank
3dexport
mini bank 3d model
Mount
3d_export
free
![mounting bracket](/t/11930644.jpg)
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
![MOUNTING](/t/13297806.jpg)
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Mounts](/t/13301538.jpg)
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Mount Fuji](/t/13283919.jpg)
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
![Headphone mount LR](/t/13049709.jpg)
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
![Mount rainier](/t/13389641.jpg)
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
![pipe mounting](/t/13242068.jpg)
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
![Mounting Tires](/t/13457386.jpg)
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
![Magnetic GoPro Mount](/t/11385909.jpg)
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
![Stone Mount](/t/13279026.jpg)
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)