Pitlab Mini-Talon Mount by seearestacey

Last crawled date: 3 years ago

Note: some pieces are not entirely my original design, therefore I cannot take credit for them. I borrowed concepts from other people and adapted them.
My intent here is to provide an option for Pitlab AP Owners to effectively mount their Pitlab FPV equipment into the very popular and excellent Mini-Talon airframe.
(Pitlab OSD/Autopilot is an excellent product BTW, and in my opinion the best AP on the market!) You can find their products here:https://www.pitlab.com/fpv-system.html
The Dragonlink Micro Receiver mount is an adaptation of the excellent design of legendary mark_q:https://www.thingiverse.com/thing:1780216https://www.rcgroups.com/forums/member.php?u=21372
Please visit his page for many great things!
The Antivibration mount is an adaptation of the popular "Omnimac" APM Mount.
This mount uses the following additional parts:
65g Vibration Damping Balls:https://hobbyking.com/en_us/vibration-damping-ball-65g-bag-of-8.html?___store=en_us
M3x10 Plastic Screws:https://hobbyking.com/en_us/m3x10-nylon-screws-10pcs-bag.html?___store=en_us
4-40 x 3/8" long Hex Drive Flat Head Screws:https://www.mcmaster.com/#92210a108/=1aptbra
4-40 Hex Nuts:https://www.mcmaster.com/#91841a005/=1aptcxx
(Use some CA glue, and glue these permanently into place)
You will also need an M3 x 0.5 metric tap, and a 2.5mm drill to manually drill and tap all the holes for the M3 plastic screws.