Thingiverse
Pitan N1714
by Thingiverse
Last crawled date: 4 years, 2 months ago
Hey! This is my remix the Pitan extruder, it's modified for mount either to Nema17 and Nema14 motor.
Using the 105ZZ bearings, classic 20mm spring and M3x5mm inserts instead M3 nuts.
Is printed from PETG without supports excluding clamp. Print resolution 0.2mm, infill 30% for body and spacer, 50% for clamp and 100% for gears.
Spacer is designed for mount to 10x10 aluminum profile...
Using the 105ZZ bearings, classic 20mm spring and M3x5mm inserts instead M3 nuts.
Is printed from PETG without supports excluding clamp. Print resolution 0.2mm, infill 30% for body and spacer, 50% for clamp and 100% for gears.
Spacer is designed for mount to 10x10 aluminum profile...
Similar models
thingiverse
free
Clamp spacer TPU 26mm ID 34mm OD by s1ugh34d
...tpu 26mm id 34mm od by s1ugh34d
thingiverse
bar clamp spacer
26mm id
34mm od
2mm ledge
16mm wide
spacer for a printed bar clamp
thingiverse
free
Table Mount For Handbrake
...or an m12 spacer on the bottom side of the print.
this was printed in pla with 3-4 walls while laying on the side with 20% infill
thingiverse
free
PCB Clamp by vik
...b, so tiny pcbs with no mounting holes can be held in place.
alternatively, if there is a mounting hole, just use it as a spacer!
thingiverse
free
Niche3D UV Sterilizer Mounting Clamp Spacer
...er screws. measure your screw length carefully. if screws are too long you may accidentally drill into the bottom of your tank.
thingiverse
free
Prusa fan ducts and mount for Pitan by moose4621
...had great success with my own machined filament drive wheels.
i use a recycled nema17 sized stepper from an epson inkjet printer.
thingiverse
free
K40 Print bed spacers by myyellowminicooper
...inter bed.
this way your honeycomb can lay flat on the print bed, and you still have the option to use the bed clamp if you wish.
thingiverse
free
CR-10 V2/V3 Solid Mount Spacer by Hilbe
...cer to silicon mounts. print with petg. scale the z height as appropriate, default is 5mm. 5mm works with the aluminum mounts.
thingiverse
free
Immortal T Mount for 30mm Spacer by egodrift
...acer by egodrift
thingiverse
immortal t mount for 30mm spacer.
print 2 of these mounts to hold your immortal t crossfire antenna
thingiverse
free
Geeetech Prusa i3 Groove Mount by ctodish
...on't need the sensor (you may want to print an extra one to use as a spacer if your hotend ends up too close to the x plate).
grabcad
free
Clamp Base Spacer
...clamp base spacer
grabcad
base spacer for a clamping tool, a video of this being made can be found on my youtube channel.
Pitan
thingiverse
free
Pitan Dual Drive by lcortese
... the pitan gears and combine with a two cloned bmg gears. the idea is to be able to have a cheap dual drive with a 3:1 reduction.
thingiverse
free
Base Pitan para Hypercube by BorrajosPower
...base pitan para hypercube by borrajospower
thingiverse
es la base para montar el pitan para argento al carro de la hipercubo_ar.
thingiverse
free
Pitan Gear 1 V1.2 4mm
...pitan extruder but the motor has a 4mm shaft instead of the regular 5mm.
this gear has been modified to suit the 4mm shaft motor.
thingiverse
free
Spoked Pitan gear by cobradane
...spoked pitan gear by cobradane
thingiverse
refined gear 2 to make it more material efficient if printing at high infill density
thingiverse
free
Prusa fan ducts and mount for Pitan by moose4621
...had great success with my own machined filament drive wheels.
i use a recycled nema17 sized stepper from an epson inkjet printer.
thingiverse
free
Pitan Extruder 605ZZ Bearing Mod by eadev92
...x22mm
ahoy!!!
check my others things and guides (how to) build fully printed hexacopter on:http://drone-core.com/others/gorhex
;)
thingiverse
free
Anet A8/AM8 E3D Direct drive baseplate for Pitan Extruder by bipsen
...er - to see how everything matches up - so please be patient with printing the parts until i have confirmed that things match up.
thingiverse
free
Pitan Bowden Modified Gear and Mount by shreddedbacon
...e small gear.
use 3x m3x40mm screws instead of the 3x m3x30mm (from the original pitan) screws to secure it to the stepper motor.
thingiverse
free
Pitan 625 Bearing by 50an6xy06r6n
...y cleaning up broken references and unconstrained elements in sketches. only 2 stl files for the basic body and cover components.