Thingiverse
Pistol Crossbow Bolt and Fletching by Pythonp90
by Thingiverse
Last crawled date: 5 years, 11 months ago
This was designed off the cheap aluminum bolts from amazon.
The bolt fletching kept breaking so I made replacements, they are actually much stronger then the originals.
I printed these for use with the Sliding Legolini from Jaaanikhttps://www.thingiverse.com/thing:4210059
I used the print settings Jaaanik recommends for the Legolini
Layer height of 0.2 mm
Wall thickness of 1.6 mm
1.2 mm bottom and top walls
Infill 25-30%
The bolt fletching kept breaking so I made replacements, they are actually much stronger then the originals.
I printed these for use with the Sliding Legolini from Jaaanikhttps://www.thingiverse.com/thing:4210059
I used the print settings Jaaanik recommends for the Legolini
Layer height of 0.2 mm
Wall thickness of 1.6 mm
1.2 mm bottom and top walls
Infill 25-30%