Pipetboy/Pipet Filler Holder for Shelf or Wall Mount by SchusterCF

Last crawled date: 4 years, 5 months ago

Either print in orientation as is with support to get a nice, smooth outside surface and sand part on bottom or, print upside down to minimize the need for support but sacrifice surface finish.
I used sticky foam pads on both flat areas touching the shelf and this amount of adhesive easily supports the weight of the pipetboy. My guess is, that Infill could be reduced to 50% without any issues (make shell thick enough to sand if neccessary).
Pipetboy sits perfectly in opening.