Thingiverse
PinTray BookStyle by FrenchKey_fr
by Thingiverse
Last crawled date: 3 years, 2 months ago
This box is designed to place the pins of a pin tumbler lock including key pins, the master wafers if any, driver pins, and springs for easy carrying of a dismantled cylinder.
It closes very securely, no risk of unwanted opening.
INSTRUCTIONS to build :
1/ Print both parts,
2/ Cut a 40mm long, 1.75 mm in diameter plastic filament (basically the same filament you printed the box with),
3/ Insert the wire as an axis of the hinges,
4/ Heat up the ends of the hinges (with a lighter or a soldering iron) to stick the wire in place
It closes very securely, no risk of unwanted opening.
INSTRUCTIONS to build :
1/ Print both parts,
2/ Cut a 40mm long, 1.75 mm in diameter plastic filament (basically the same filament you printed the box with),
3/ Insert the wire as an axis of the hinges,
4/ Heat up the ends of the hinges (with a lighter or a soldering iron) to stick the wire in place
Similar models
thingiverse
free
Pin Drill Box by PhilT4
...pin drill box by philt4
thingiverse
hinged box for storage of pin drill and bits. use filament for hinge pin.
thingiverse
free
Hinged Screwdriver Box
...screwdriver box
thingiverse
hinged box for mini screwdrivers. you can assembly the hinge by two pieces of filament or metal pin.
thingiverse
free
Hinge by kevinmcl001
... pin. holes for 4 #8 screws. print 2 copies and use a soldering iron to melt one end of the pin to the hinge to keep it in place!
thingiverse
free
Dry Filament Box Bottom with Dowels by Joe-OSU-
...ext to the hinges where the hinges on the filament box top was rubbing previously. this can be seen in the model or the pictures.
thingiverse
free
Yet another Hinge by PrototypeMe
... flat
the hinge has a 2mm bore and i use 1.75 filament as a pin, this is cut long and melted at each end so it stays in place.
thingiverse
free
Hinge Pins and snaps for tool box by zdmbkjkyo2y
...nserted to keep hinges in place. use a dab of super glue inside top hole of the hinge on the open side to keep snap bar in place.
thingiverse
free
Hinge for cardboard box 270degree by komadojiro
...s hinge was designed for cardboard boxes with front shutter.
it can support 270 degree.
using 1.75mm abs filament for hinge pins.
thingiverse
free
Hatchbox Filament Stand - Hinged Mounting Bracket and Guide by xxxMTIxxx
... a hatchbox filament stand. it can be locked into place on both sides with pins that can be made from paperclips or cotter pins.
thingiverse
free
Hedgehog Ring Box V.3 by ecwhite01
...dgehog ring box v.3 by ecwhite01
thingiverse
print at 100% scale to use 1.75 filament as a hinge pin. push through and cut flush
thingiverse
free
Hinged Parts Box by brianmatters
...rdware from spilling out even during a drop.
the hinge uses raw filament for the pin and is glued in place during final assembly.
Fr
turbosquid
$25
FR-F2
...quid
royalty free 3d model fr-f2 for download as fbx and obj on turbosquid: 3d models for games, architecture, videos. (1563954)
3ddd
$1
Freech,FR-D3022C
...freech,fr-d3022c
3ddd
freech , стол
freech,fr-d3022c
3ddd
$1
FR Mundial
...fr mundial
3ddd
смеситель
смеситель
turbosquid
free
kitchen fr
...ee 3d model kitchen fr for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1444246)
turbosquid
$35
FR aBistro3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
FR aChair04
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
FR aTable09
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
FR bCabinet07
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
FR aTable13
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
FR aBench05
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.