Thingiverse
Pimoroni Raspberry Pi Pico Unicorn Pack LED Diffuser by IridisAlpha
by Thingiverse
Last crawled date: 4 years, 8 months ago
A cap which fits over a Pico Unicorn Pack from Pimoroni to diffuse the light from LEDs. The effect is really nice in real life, but hard to photograph - it's much nicer than the pictures suggest.
Includes different thicknesses for more or less diffusion. Designed to print at 0.2mm layer height. Start with the 0.6mm version, which will print 3 layers, then try thicker/thinner ones if need.
Cap should fit tightly over the Unicorn. Push down until it rests on the buttons.
Includes different thicknesses for more or less diffusion. Designed to print at 0.2mm layer height. Start with the 0.6mm version, which will print 3 layers, then try thicker/thinner ones if need.
Cap should fit tightly over the Unicorn. Push down until it rests on the buttons.